2017 River Falls FFA Alumni Pull - July 15th
|
Registered: 06/14/2016 Posts: 52 |
River Falls FFA Alumni Truck and Tractor Pull - July 15th 2017
WTPA Sanctioned Classes Light Limited Super Stock Super Farm Light Pro Stock [www.wtpapull.com] FFA Alumni Classes Farm Stock Non Turbo 7,500 - 75 Factory rated horsepower (5 mph) Max Tire - 18.4x38 9,000 - 100 Factory rated horsepower (5 mph) Max Tire – 18.4x38 Farm Stock Turbo 11,000 - 8 mph 12,500 - 8 mph 14,000 - 8 mph Light Open - 3x3 Charger Diesel Only 6500 Heavy Open 8500 9500 Improved Farm - Turbo Maximum of 2.8” inlet by 3” outlet 11000 11500 Pro Farm - Maximum 3x3 turbo 10500 11000 Diesel Trucks 8,500 Stock 8,500 Hot Street 8,000 Open All classes $30 per hook (Excluding NTPA) Track Patrol Sleds NEW THIS YEAR Class line up set 30 min prior to start of class Please register on time. Classes stated above are final for the event. NO CLASSES WILL BE ADDED More Bleachers More Parking More Port-a-potties Bigger spectator area More lights For further information contact: Ryan Joy 715-821-7676 Pete Lubich 715-821-7800 [www.riverfallsffaalumni.org] Directions [www.google.com] More info to come along with starting time, payouts, class order, etc. |
Re: 2017 River Falls FFA Alumni Pull - July 15th
|
Foolish Pleasure II
|
Why no 7500 pound heavy and lite? You had it last year? Thanks |
Re: 7500 Class
|
Registered: 06/14/2016 Posts: 52 |
Last year there was 5 tractors in the 7500 Light Open and 2 tractors in the 7500 Heavy Open. It was our understanding that the tractors that pull in the 7500 Light Open normally pull in the WTPA Light Limited Super Stock Class. As far as the tractors in the 7500 Heavy Open, we would have them pull in the FFA Alumni 8500 Heavy Open. With having the WTPA Classes this year we had to eliminate a few of the FFA Alumni classes to get the show done at a decent time. We know theres going to be some confusion so thats why we wanted to get info out this early. Sorry for any confusion that this change will create. We are interested in any input we can get. Email link below with input. All input is welcomed
FFA Email Address: rf.ffa.alumni@gmail.com For more info: Ryan Joy 715-821-7676 Pete Lubich 715-821-7800 Thanks - River Falls FFA Alumni |
Re: 7500 Class
|
LLSS
|
1 of those tractors pulled with WTPA in the LLSS class 4 or 5 times last year. It will be great to have those other 4 in the LLSS class this year. You could have more in your 6500 open class if alcohol wasn't banned. |
Re: 7500 Class
|
Hmm
|
So the open class is not really open |
Re: 7500 Class
|
Foolish Pleasure II
|
Due to the turbo rules I can not run the 6500 pound open class, and 8500 open is to heavy for my chassis! |
Re: 7500 Class
|
LLSS
|
Correction, none of those tractors pull NTPA. |
Re: 2017 River Falls FFA Alumni Pull - July 15th
|
52 days to get those tractors ready! |
Re: 2017 River Falls FFA Alumni Pull - July 15th
|
Anonymous User
|
Why don't you run improved and pro farm together? Just call it the 20.8 class... |
Re: 2017 River Falls FFA Alumni Pull - July 15th
|
Paull
|
No 5500 0r 6500 farm stock? |
Re: 2017 River Falls FFA Alumni Pull - July 15th
|
Registered: 06/14/2016 Posts: 52 |
Why don't you run improved and pro farm together? Just call it the 20.8 class...
We decided to keep the 2.8 and Pro Farm class separate again this year based off the number of hooks in each class last year No 5500 0r 6500 farm stock? There will be an antique tractor pull on Sunday July 16th...more info along with classes to follow: Contact Pete for more info on the Antique Pull Pull Info The class line up will be coming shortly....just a reminder that the pull will start on time this year with both sleds going and WTPA will start at 7pm and once the WTPA classes are done we will jump right back into the FFA Alumni pull For more info: Ryan Joy 715-821-7676 Pete Lubich 715-821-7800 |
2017 Pics
|
Registered: 06/14/2016 Posts: 52 |
Here is pics from 2017 Pull!! |
Re: 2017 Pics
|
Registered: 06/14/2016 Posts: 52 |
2016 Pics not 2017! |
Re: 2017 River Falls FFA Alumni Pull - July 15th
|
Anonymous User
|
Here is some more information about pulling in River Falls. Saturday July 15th, and Sunday July 16th. The FFA also would like to Thank all our great sponsors!
Questions about this years event? Call
|
Pics of New Fence
|
Registered: 06/14/2016 Posts: 52 |
Here are some updated pics of the pull grounds!! |
2017 River Falls FFA Alumni Pull - July 15th
|
Anonymous User
|
Here are our payouts attached. Hope to see you there!!!! Edited 1 time(s). Last edit at 07/08/2017 03:51PM by River Falls FFA. |
Safety Equipment - Please Read
|
Registered: 06/14/2016 Posts: 52 |
Here are the Safety Equipment Rules required per our insurance....we have a new insurance company this year and the Safety Rules below have to be enforced.
Anyone pulling Improved Farm BRING HELMETS!!!! Thanks in advance River Falls FFA Alumni General Safety Equipment (Required for Light Open, Heavy Open, and Pro Farm Classes) All tractors must be equipped with the following safety equipment: Steel flywheel, SFI approved scatter blanket, wheelie bars with bumpers strong enough to support weight of tractor, fenders, kill switch, 2.5lb fire extinguisher, SFI approved roll cage, side shields and a second shutoff at the pump. Must have a spring-loaded throttle that returns to idle. Must have a 3 way dump valve a head of the injection pump operated by a cable. SFI approved fire suit, helmet, gloves, shoes, and five-point harness required. Electric fans are required. Stock engine driver fans are not allowed. A signed driver statement required for flywheel. Improve Farm Classes Roll bar or roll cage is required. If your tractor has a roll cage, a 5-point harness is required, otherwise a seatbelt is adequate. SFI approved helmet is required. Steel flywheel and SFI approved scatter blanket required Wheelie bars and a cable operated air shut off at the rear of the tractor mounted in the middle. Must have side shields if running a belt-driven fan. An electric fan is preferred. |
Class Order
|
Registered: 06/14/2016 Posts: 52 |
Here is the class order for the pull
The pull will start at 530 with the WTPA starting at 7pm We will be running just the one sled (Red Sled) during the WTPA Pull Blue Sled 7500 Farm 9000 Farm Break: 7pm (WTPA Pull) 8500 Stock Diesel Pickup 11000 Farm 12500 Farm 14000 Farm If your pulling in 7500/9000 Farm be there and ready to pull by 530pm as were going to pull both these classes before the WTPA Pull at 7pm Red Sled 6500 Open WTPA (7pm) 8500 Hot Street Pickup 8500 Open 11000 Improve Farm 10500 Pro Farm 8000 Open Diesel Pickup 9500 Open 11500 Improve Farm 11000 Pro Farm If your pulling in 6500 Open be there and ready to pull by 530pm as were going to pull this class before the WTPA Pull at 7pm Please be on time Thanks River Falls FFA Alumni Questions Ryan Joy 715 821 7676 Pete Lubich 715 821 7800 Cody Hakes 715 338 4603 (Trucks) |
Tractor Rules
|
Registered: 06/14/2016 Posts: 52 |
River Falls FFA Alumni
July 15th 2017 Tractor Pull Rules Tractor General Rules 1. Be a Professional. Must have tractor registered before class starts. No exceptions made. Can call ahead of time to get registered if your tractor is arriving late. 2. Pullers must be 18 years of age or older to participate. Minors must have parent or Guardian consent forms signed. No one under the age of 18 will pull outside the Farm Stock Classes. No one younger than 12 years of age will be allowed to pull. 3. All pulls will be made from drawbar. The hitch height must not exceed 20 inches. All pullers must furnish their own twisted clevis or a 3” hoop hole. Clevis must be fastened to the drawbar with a 3/4” or larger bolt and safety pin. 4. No weights hanging directly above the draw bar. Must have 12” opening for the hook-up to the sled. 5. One fuel type only. Alcohol maybe used as fuel in open classes only. 6. Pulling order will be determined randomly by draw. 7. Operator must remain seated and drive in a safe manner. 8. Tractors must operate in a safe manner at all times. No chain jerking or hot-rodding Allowed. 9. All tractors must be in neutral or park when being hooked or unhooked from sled.“Hands up” signal by the driver will be used to indicate this is being followed. 10. Tractor must remain within the boundaries of the track. Failure to do so will result in Disqualification. 11. Tractor must be occupied while it is running. 12. Loss of any weight or part of the tractor will be grounds for disqualification. 13. All pulls must start with a tight chain and be straight in-line with the sled. 14. All drivers pull at their own risk. River Falls FFA Alumni, Total Excavating and Deiss Storage shall not be held responsible for any accident, injuries or damage to equipment. 15. Class pulling order and drivers order will be posted. 16. Tractors will be stopped if front wheels are more than 24” off the ground. 17. All tractors must scale prior to hooking to sled, immediately prior to the start of your Class. 200lbs grace over printed class weight. Once weighed, you are staged. Leaving the staging area is not allowed. 18. NO BEER OR ALCOHOL TO BE CONSUMED FOR CONTESTENTS!!!! 19. Track officials have the right to move a puller to a different class. 20. The first puller has no option of a re-hook. Only chance to re-hook is if the sled has adjustments made to it. 21. In the speed limit classes, the puller has 100 feet to adjust his speed, after 100 feet any time of exceeding the speed will result in disqualification. 22. Violations of any rule shall constitute a disqualification. Arguing with judges will not be Tolerated, and will result in immediate disqualification. 23. ALL GENERAL RULES APPLY TO EVERY CLASS!!! 24. All JUDGES’ DECISIONS ARE FINAL!!! Failure to obey track officials will result in Disqualification and may lead to removal from event. General Safety Equipment (Required for Light Open, Heavy Open and Pro Farm Classes) 1. All tractors must be equipped with the following safety equipment: 2. Steel flywheel, SFI approved scatter blanket, wheelie bars with bumpers strong enough to support weight of tractor, fenders, kill switch, 2.5lb fire extinguisher, SFI approved roll cage, side shields and a second shutoff at the pump. Must have a spring-loaded throttle that returns to idle. Must have a 3 way dump valve a head of the injection pump operated by a cable. 3. SFI approved fire suit, helmet, gloves, shoes, and five-point harness required. 4. Electric fans are required. Stock engine driver fans are not allowed. 5. A signed driver statement required for flywheel. 6. Safety equipment and other components must be made available for inspection upon request of judges and upon protests. Farm Stock 7500 non-turbo 75 Factory rated horsepower (5 mph) Max Tire – 18.4x38 9000 non-turbo 100 Factory rated horsepower (5 mph) Max Tire – 18.4x38 11000 turbo 8 mph 12500 turbo 8 mph 14000 turbo 8 mph 1. ALL GENERAL RULES APPLY 2. Must have OEM block, fuel system, frames, hoods, drawbar, seats, grills, and front end. 3. Cut tires not allowed. 4. Tractors must have working hydraulics and PTO. 5. Water injection not allowed. 6. Fuel source must be factory to make and model. If it’s a diesel it’s still a diesel. 7. Add on turbo’s: Factory and M&W Turbo’s allowed in all turbo classes. Must be installed in a stock appearing manner. 8. Any tractor with a blower internal or external will pull in a turbo class 9. Turbo Tractors: all oil lines, exhaust systems and intake tubing must fit in a total stock manner and must be installed on tractor in order to compete. Stock air cleaner housings and correct plumbing required. Air filter elements not mandatory. 10. 2800 RPM maximum for Turbo Classes and factory stock RPM set by the Nebraska Test Book for Non Turbo Classes. If tractor is not listed, 2000 RPM will be used as a base. Light Open 6500 1. ALL GENERAL RULES APPLY 2. ALL GENERAL SAFTEY EQUIPMENT REQUIRED 3. Engine block cannot be modified externally in anyway. Only one injection pump allowed. Intercoolers allowed. No nitrous allowed. Only one fuel allowed. Up to a P Pump allowed. Alcohol not allowed. 4. Restricted to a max 3x3 single turbo. 5. Max tire size of 24.5 x 32 Heavy Open 8500 9500 1. ALL GENERAL RULES APPLY 2. ALL GENERAL SAFTEY EQUIPMENT REQUIRED 3. Engine block cannot be modified externally in anyway. Only one injection pump allowed. Intercoolers allowed. No nitrous allowed. Only one fuel allowed. Up to a P Pump allowed. Alcohol allowed. 4. Can use multiple turbos. Improved Farm 11000 11500 (Turbo Maximum of 2.8” inlet by 3” outlet) 1. ALL GENERAL RULES APPLY 2. Roll bar or roll cage is required. If your tractor has a roll cage, a 5-point harness is required, otherwise a seatbelt is adequate. 3. SFI approved helmet is required. 4. Steel flywheel and SFI approved scatter blanket required 5. Wheelie bars and a cable operated air shut off at the rear of the tractor mounted in the middle. 6. Must have side shields if running a belt-driven fan. An electric fan is preferred. 7. No Injection pumps larger then an A Pump unless a P Pump came installed as OEM. 8. No cut tires allowed. 20.8 x 38 MAXIMUM 9. 3800 RPM limit. 10. Water injection is allowed. 11. 466 Block. Factory intake and exhaust manifolds. Driveline, transmission, rear axle, frames, front axles and sheet metal must match model of manufacturer. 12. Must have working PTO or hydraulics. No Slots or slug Turbo. No inner or after coolers. Pro Farm 10500 11000 (Maximum 3x3 turbo) 1. ALL GENERAL RULES APPLY 2. No block larger then 540” Cubic Inch OEM to tractor 3. 466” Cubic Inch or less is allowed a max of a 3x3 turbo. Over 466” Cubic Inch max 2.8 x 3” Turbo. 4. Roll bar or roll cage is required. If your tractor has a roll cage, a 5-point harness is required, otherwise a seatbelt is adequate. 5. SFI approved helmet is required. 6. Steel flywheel and SFI approved scatter blanket required 7. Wheelie bars and a cable operated air shut off at the rear of the tractor mounted in the middle. 8. Must have side shields. An electric fan is required. 9. No larger then P Pumps Allowed 10. Cut tires allowed. 20.8 x 38 MAXIMUM 11. No RPM limit. 12. Water injection is allowed. 13. Driveline, transmission, rear axle, and sheet metal must match model of manufacturer. 14. No Slots or slug Turbo. No inner or after coolers. 15. Factory OEM Intake and Exhaust manifolds. |
Truck Rules
|
Registered: 06/14/2016 Posts: 52 |
River Falls FFA Alumni
July 15th 2017 Truck Pull Rules TRUCK GENERAL RULES 1. Be professional. Must have truck registered before class starts. No exceptions made. Can call ahead of time to get registered if your truck is arriving late. 2. Pullers must be 18 years of age or older to participate. Minors must have parent or guardian consent forms signed. No one younger than 16 years of age will be allowed to pull. 3. Maximum height of hookup and pulling point cannot exceed 26” to hooking point. Hooking point must have 3” opening 4. No weight can extend more than 60” forward from the centerline of the front axle. (for classes that apply) 5. All trucks MUST have working brakes. 6. Drivers must wear a seat belt or restraint system. No passengers allowed. Failure to do so will result in disqualification. 7.Pulling order will be determined randomly by draw. 8. Operator must remain seated and drive in a safe manner. 9. Trucks must operate in a safe manner at all times. No chain jerking or hot-rodding allowed. 10. All trucks must be in neutral or park when being hooked or unhooked from sled. “Hands up” signal by the driver will be used to indicate this is being followed. 11. Truck must remain within the boundaries of the track. Failure to do so will result in disqualification. 12. Truck must be occupied while it is running, failure to do so will result in disqualification. 13. Loss of any weight, part of the truck or if the doors or hood open while pulling will be ground for disqualification. Becoming disconnected from the sled while pulling will result in disqualification. 14. All pulls must start with a tight chain and be straight in-line with the sled. 15. All drivers pull at their own risk. River Falls FFA Alumni nor Total Excavating shall be held responsible for any accident, injuries, or damage to equipment. 16. Class pulling order and drivers order will be posted. 17. All truck must scale prior to hooking to sled, immediately prior to the start of your class. 200LB grace over printed class weight. Once weighed, you are staged. Leaving the staging area is not allowed. Hitch height will be measured at weigh in. 18. NO BEER OR ALCOHOL TO BE CONSUMED FOR CONTESTENTS!!!! 19. Track officials have the right to move a puller to a different class. 20. The first puller has no option of a re-hook. Only chance to re-hook is if the sled has adjustments made to it. So make it count! 21. Violations of any rule shall constitute a disqualification. Arguing with judges will not be tolerated, and will result in immediate disqualification. 22. ALL GENERAL RULES APPLY, UNLESS CLASS SPECIFIC 23. ALL JUDGES’ DECISIONS ARE FINAL!!! Failure to obey track officials will result in disqualification and may lead to removal from event. 8000lb Open Diesel 1. All general rules apply, along with class specific rules. 2. Trucks are highly recommended to have a Fuel/air shut off and Driveshaft loops. 3. 35-18.00-15 Bar and Cut tires permitted. 4. A fire extinguisher system is permitted and highly recommended. 5. OEM Firewall is mandatory. 6. The complete OEM floor pan is mandatory. 7. The body must be OEM truck body. The body must retain full sheet metal, after-market hoods are permitted. The hood must be closed and securely latched while vehicle is hooked to the sled. 8. D.O.T. approved helmet required to be worn while pulling. 9. All open class trucks must have SFI approved bell housing on clutch, SFI approved shield on transmission body, SFI flex plate, SFI approved damper, SFI fire extinguisher mounted within reach of driver and SFI approved fire jacket. 8500lb Hot Street Diesel 1. General rules apply, along with class specific rules. 2. Trucks are highly recommended to have Fuel/air shut off and Driveshaft loops. 3. Must be Dot approved tire. Maximum height 35 inches.No studded tires or chains. No alterations to tires permitted. No bar or terra tires. No duals unless factory OEM equipped. 4. A fire extinguisher system is permitted and highly recommended. 5. The complete OEM floor pan is mandatory. 6. The body must be OEM truck body. The body must retain full sheet metal, after-market hoods are permitted. The hood must be closed and securely latched while vehicle is hooked to the sled 7. Truck must be street legal [headlights, tail lights,bumpers, ex. ] registered and insured. 8. Hanging weights will be voted on at drivers meeting, majority rules. 9. Diesel fuel only, no injectables (nos, meth, propane). 10. No hood stacks. 11. Suspension stops/ blocks are allowed, along with use of air bags. 8500lb STOCK Diesel 1. General rules apply, along with class specific rules. 2. Must have hood, fenders, doors, windshield, rear window. 3. No hanging weights allowed, bed of truck only. 4. Diesel fuel only, no injectables (NOS, water/meth, propane). 5. No ladder bars, No track bars. 6. STOCK single turbocharger (unless factory equipped i.e. 6.4 Ford Powerstroke). 7. Use of a singe tuner is allowed. 8. No lift pumps allowed. 9. No Hood stacks. 10. Max tire height is D.O.T. approved 35” tire. 11. Air bags allowed but cannot be inflated. No suspension stops/ blocks. 12. Trucks must be street legal, registered and insured. 13. After-market intake is permitted. 14. Stock Fuel system, no oversized injectors, cp3, HPOP. |
Improve Farm: Please Read
|
Registered: 06/14/2016 Posts: 52 |
Improve Farm Classes:
We have been getting a lot of phone calls on the block/cubic inch rule.....so to clarify, tractors must have a 466 block. Anything bigger then a 466 block for example 531, 619, 640....won't be able to pull in the Improve Farm Class and would have to run Open. I hope that is clears up any confusion Also please remember on this class the safety rules as we are required to enforce them this year per are insurance policy Thanks River Falls FFA Alumni Improved Farm 11000 11500 (Turbo Maximum of 2.8” inlet by 3” outlet) 1. ALL GENERAL RULES APPLY 2. Roll bar or roll cage is required. If your tractor has a roll cage, a 5-point harness is required, otherwise a seatbelt is adequate. 3. SFI approved helmet is required. 4. Steel flywheel and SFI approved scatter blanket required 5. Wheelie bars and a cable operated air shut off at the rear of the tractor mounted in the middle. 6. Must have side shields if running a belt-driven fan. An electric fan is preferred. 7. No Injection pumps larger then an A Pump unless a P Pump came installed as OEM. 8. No cut tires allowed. 20.8 x 38 MAXIMUM 9. 3800 RPM limit. 10. Water injection is allowed. 11. 466 Block. Factory intake and exhaust manifolds. Driveline, transmission, rear axle, frames, front axles and sheet metal must match model of manufacturer. 12. Must have working PTO or hydraulics. No Slots or slug Turbo. No inner or after coolers. |
Re: 2017 River Falls FFA Alumni Pull - July 15th
|
dum
|
that would be like having a farm tractor in that class can t catch them. |
Re: 2017 River Falls FFA Alumni Pull - July 15th
|
NHT7.210
|
Any results from last night? Curious about the WTPA lite pro class specifically |
Re: 2017 River Falls FFA Alumni Pull - July 15th
|
WTPA Light Pro results from River Falls 1st Alan Cook Black Thunder, 2nd Duane Bauer Beaver Hunter Reloaded, 3rd Kurt Afdahl Weekend Mistress, 4th Ryan Lynn Crazy Horse, 5th Chad Webster Workin Girl |
Stolen Weights - Please Return Them
|
There was 8 IH weights stolen off a IH 560 and IH 686 that was parked and left at pull site overnight!! The weights had two black paint marks over the handle of the weights. Please be respectful and return the weights to the pull site!!
Thanks Ryan |
Thanks Everyone!!
|
Registered: 06/14/2016 Posts: 52 |
The River Falls FFA Alumni would like to thank everyone that came to the River Falls Day Pull! Thank you fans, pullers, promoters, and sponsors!!!
Thank You to Total Excavating - Chris Kusilek for making this location happen! Chris did an awesome job with the site preparation and the track was once again awesome! Thank You to Kurt Afdahl with the WTPA for making the WTPA pull happen this year!! Kurt did an awesome job in helping get the WTPA to come to River Falls for the first time ever this year! Again a huge Thank You to both Chris Kusilek and Kurt Afdahl!!!! 2017 River Falls FFA Alumni Sponsors Total Excavating WTPA Value Implement Compeer Financial Concrete Concepts and Construction Minnesota Ag Group - Hastings Fuel Lift Kinni Sports and Power Mel's Steiner Plumbing Electric Heating Inc South Fork Cafe Winfield United Darrel's Septic Service Devine Liquor Countryside Coop Deiss Storage Systems Dicks Hometown Liquor RCD Western Wisconsin Ag Supply First National Bank River Falls Stunzya Hanson Construction Kwik Trip Plumber Concrete River Falls State Bank Emmas Bar Xcel Energy Atlas Tractor Glass Express Reis Insurance Agency Ace Ethanol Advanced Auto Care Alpha Gamma Rho Fraternity Auto Value Bernard of River Falls C&J Builders Advanced Auto Parts Comfort Plus Insulation Dorwin Farms Freeman Drugs H&F Home Furnishings Hove Auto Body Dairy Queen Hub 70 Design and Print Johnson Quality Plumbing Kinnic Veterinary Leith Insurance Agency O'Reilly Auto Parts Pechacek's General Contracting Reliance Electric Motors River Falls Mutual Insurance River Falls Tire Security Financial Bank Smith Sales St Croix Tax Steel Town Westconsin Credit Union Ace Hardware Express Lube and Rental American Family Insurance - Jill Morrow Frontier Ag Turf – New Richmond BP of River Falls Munson Hybrids Channel Seeds – Keith Gunderson Pioneer – Chris Edgar Nexgrow Best Built Fence Company Bauer Built Max 104.9 FM Mainstreeters Henkel Veterans Royal Credit Union Our Town Has It Air Motion Systems Inc Fair Valley Performance Main Street Family Dental O’Keefe Inc Principal Preservation Services Servant of the Shepherd Church Shannon Crop Services Sweeds Service Unline Keyes Chevytown Dream Wolf Expressions River Guide Kayaks O’Malley Custom Ag Next Level Events Ziegler Cat Guy Jensen Goodwin Farms Ross Associates Scott Spiegelberg We would like any feedback we can get to better help our FFA Alumni improve things for next years pull! Any feedback we can get would be greatly appreciated! For Pull Feedback Contact Below: Thanks!! Text Ryan: 715 821 7676 Keith: 715 684 9241 Email: rf.ffa.alumni@gmail.com Thanks again for all of the support! River Falls FFA Alumni |
Re: Thanks Everyone!!
|
outsider looking in,
|
looked to me that the Sunday pull was cheated by not being included with the Saturday session,no spectators and fewer tractors. Just an observation,am sure that the people there Sunday would have enjoyed the show Saturday evening,I would have !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! |
Results
|
Registered: 06/14/2016 Posts: 52 |
2017 River Falls Days Tractor Pull Results
7500 Non Turbo Mike Filkins 341.1 International 686 Aaron Vadner 341 Farmall 560 Kim Spaeth 316.9 John Deere 3020 Randy Ciolkosz 314.7 International 666 Adam Birr 308.9 MM 670 Landon Laher 265.7 John Deere 3020 Mitch Filkins 258.1 International 560 Donald Hershaw 235.3 Oliver 950 9000 Non Turbo Adam Birr 298.9 Ford 7810 Jason Maier 279.9 John Deere 4020 Curt Peine 275.1 John Deere 4020 Kory Pechacek 268.7 John Deere 4000 John Langer 266.3 International 806 Roman Huppert 264.8 John Deere 4020 Mike Peine 264.8 John Deere 4000 Rick Peine 263.1 John Deere 4020 Abe Rohl 259.3 John Deere 4020 Ryan Pechacek 256.3 John Deere 4000 Travis Rohl 253.3 John Deere 4010 Butch Reinhardt 241.6 International 966 Mike Filkins 237.1 International 686 Bobby Ciolkosz 234.3 International 666 Jim Kaczmarek 231.9 John Deere 830 Donald Hershaw 184.5 Oliver 950 Paul Dombrock 179.9 Case 930 11000 Turbo Max Geraets 372.2 Ford 8600 Tyson Rohrscheib 368.1 International 1466 Jeff Johnson 367.2 AC 7000 Ben Peterson 336.1 International 1066 Cody Frederick 333.5 International 1066 Brian Benoit 314.8 International 1256 Connor Biesel 294.2 International 1066 Andy Birkel 280.8 John Deere 4430 Dominic Harris 275.5 International 1466 Phil Rohl 271.6 John Deere 4010 Jim Anderson 253.8 John Deere 4020 Mike Huppert 227.7 International 1066 Cody Jones 221.2 International 1206 Cole Marek 207.5 John Deere 4020 Corey Deiss 174.1 International 966 Gary Deiss 156.9 AC 7000 12500 Turbo Kaylin Spaeth 347.9 John Deere 6030 Max Geraets 302.1 Ford 8600 Jeff Rohrscheib 300.6 International 1466 Aaron O'Connell 299.5 John Deere 4440 Brian Benoit 298.2 International 1256 Matt Dorwin 297.1 John Deere 4450 Ben Peterson 293.1 International 1066 Connor Biesel 284.6 International 1066 Joel Heimbreht 254.6 International 1466 14000 Turbo Matt Dorwin 381.1 John Deere 4450 Bill Spaeth 377.6 John Deere 6030 Aaron O'Connell 374.2 John Deere 4440 Joel Heimbreht 245.7 International 1466 Nick Huppert 244.7 John Deere 4450 6500 Light Open Chad Zachow 342.9 International 666 Chad Webster 327.8 International 1066 Joe Gruber 283 John Deere 4455 Pete Lubich 265.9 McCormick 8500 Heavy Open Scott Andres 344.9 International 1066 Jim Bunkelman 338.1 International 1066 Kevin Andres 333.9 Case IH 7240 Crystal Andres 331.6 MX 240 Ben Martyn 296.5 International 706 Mitch Miller 223.8 International 1066 9500 Heavy Open Scott Andres 350.4 International 1066 Crystal Andres 347.1 MX 240 Kevin Andres 341.1 Case IH 7240 Jim Bunkelman 340.1 International 1066 Ben Martyn 319.3 International 706 11000 Improved Farm Bruce Keschmiter 310.1 International 1066 Marty Shambour 307.9 International 1466 Joe Green 287.1 International 1066 Derek Jensen 286.1 International 1066 Rod Magone 282.5 International 1066 Al Becker 276.1 John Deere 4055 Wendell Edmunson 270.8 International 1486 Matt Hannula 241.1 Ford 8000 11500 Improved Farm Bruce Keschmiter 316.5 International 1066 Marty Shambour 308.8 International 1466 Derek Jensen 302.5 International 1066 Al Becker 298.5 John Deere 4055 Joe Green 288.4 International 1066 Wendell Edmunson 287.9 International 1486 10500 Pro Farm Jake Decker 343.2 International 1066 Dan Lange 334 John Deere 8110 Dan Tentis 333.4 International 1066 Mark Weber 330.1 John Deere 8110 Scott Knight 329.5 International 1026 Brad Lantto 319.5 International 1066 Danny Anderson 316.8 International 1066 Dave Palecek 316.4 John Deere 4020 George Weidendorf 289.1 International 1066 11000 Pro Farm Jake Decker 336.5 International 1066 Dan Tentis 330.7 International 1066 Dan Lange 329.7 John Deere 8110 Brad Lantto 324.3 International 1066 Scott Knight 310.1 International 1206 Tanner Nettestand 293.7 International 1066 8500 Deisel Truck Street Stock Isaac Raceler 270.1 Ford F250 Mike Foulk 257.1 Ford F250 Bradley Pettee 255.9 Ford F250 Bradley Priser 248.1 Ford F250 Brad McGuiggan 243.1 Dodge Ram 2500 Zach McConaushey 241.6 GMC 2500 Cole Barnes 232.1 Ford F350 Darrell Wold 232 Ford F350 James Dalton 224.7 Ford F250 Bo Delander 220 Chevy 2500 Billy Stout 217.7 Ford F350 Hunter Traynor 210 Ford F350 8000 Deisel Truck Hot Street Chris Schultz 309.6 Chevy 2500 Jordan Esselman 296.3 GMC 2500 Dallas Zanker 294.5 Dodge Ram 2500 Bryan Dalton 260.5 Dodge Ram 2500 Kyle Kelnhofer 249 Chevy 2500 Alex Mahr 247.6 Chevy 2500 Matt Passofaro 247.4 Chevy 2500 Justin Kattre 240.4 GMC 2500 Warren Long 239 Ford F350 Shayne Birkland 238.2 Ford F350 Harry Ole 223.8 Chevy 2500 Luke Johnson 191.1 Chevy 2500 8000 Deisel Truck Open Dave Carlson 351.1 Chevy 2500 Casey Clark 350.1 Chevy 2500 Chris Schultz 304.8 Chevy 2500 Brian Fayerweather 294.6 GMC 2500 AJ O'Shea 267.9 Dodge Ram 2500 Mark Steinmetz 189.5 Dodge Ram 2500 Corey Klein 109 Chevy 2500 |
Website Statistics
Global: Topics: 38,719, Posts: 229,838, Members: 3,330.
This forum: Topics: 37,083, Posts: 225,969.
Global: Topics: 38,719, Posts: 229,838, Members: 3,330.
This forum: Topics: 37,083, Posts: 225,969.
Our newest member LT Limited Pro