03:03:25pm, Monday, April 29, 2024
|
River Falls FFA Alumni Pull July 14th/15th: 2 Day Pull
|
Registered: 06/14/2016 Posts: 52 |
New This Year: Two Day Event
Saturday July 14th 2018 – 6:00pm WTPA Super Farm Light Pro Stock Light Limited Super Stock Light Super Stock Farm Stock 11,000 turbo 8 mph 12,500 turbo 8 mph 14,000 turbo 8 mph Light Open (3x3 Turbo: Diesel Only) 6500 7300 Heavy Open 8500 9500 Improved Farm – Borderline Pullers (Turbo Maximum of 2.8” x 3”) 10500 11000 Pro Farm - Borderline Pullers (Maximum 3x3 turbo) 9500 10000 Diesel Trucks 8,500 Stock Diesel 8,500 Hot Street Diesel 8,000 Open Diesel Sunday July 15th 2018 – 1:00pm Family Day: Free Admission Gopher State Garden Tractor Pullers 1:00pm Kids Pedal Pull at 2:00pm Farm Stock 4,500 non-turbo: 45 Factory rated horsepower (4 mph) Max Tire – 15.5x38 5,500 non-turbo: 55 Factory rated horsepower (4 mph) Max Tire – 15.5x38 7,500 non-turbo: 75 Factory rated horsepower (5 mph) Max Tire - 18.4x38 9,500 non-turbo: 100 Factory rated horsepower (5 mph) Max Tire – 18.4x38 Improve Farm Stock Tractors 1957 Older 4,500 non-turbo: 7 mph (Max Tire – 18.4x38) 5,500 non-turbo: 7 mph (Max Tire – 18.4x38) 6,500 non-turbo: 7 mph (Max Tire – 18.4x38) Antique Farm Stock Tractors 1957 Older 2,500 non-turbo: 25 Factory rated horsepower (3 mph) Max Tire: One Size Over Factory 3,500 non-turbo: 35 Factory rated horsepower (3 mph) Max Tire: One Size Over Factory 4,500 non-turbo: 45 Factory rated horsepower (3 mph) Max Tire: One Size Over Factory 5,500 non-turbo: 55 Factory rated horsepower (4 mph) Max Tire: One Size Over Factory 6,500 non-turbo: 65 Factory rated horsepower (4 mph) Max Tire: One Size Over Factory For further information contact: Ryan Joy at 715-821-7676 or Pete Lubich 715-821-7800 |
|
Re: River Falls FFA Alumni Pull July 14th/15th: 2 Day Pull
|
Borderline Pullers ?
|
Who are the Borderline Pullers ?
Does it have anything to do with Championship Pullers (CPS) ? |
|
Re: River Falls FFA Alumni Pull July 14th/15th: 2 Day Pull
|
kevin
|
Yes they teamed up with a group by Rochester area |
|
Re: River Falls FFA Alumni Pull July 14th/15th: 2 Day Pull
|
Registered: 06/14/2016 Posts: 52 |
Borderline Pullers:
A group of pull promoters along with our FFA came up with a set of rules for the Pro Farm/Improve Farm classes All tractors will be inspected at all Borderline Pulls for the Pro Farm/Improve Farm classes Borderline Pullers will be running points for all there hooks for its paid members [m.facebook.com] As far as CPS, our FFA isn't sure what there current status is |
|
Re: River Falls FFA Alumni Pull July 14th/15th: 2 Day Pull
|
Rules for Borderline Pullers
|
Was on your link from River Falls Pull. Can't read the rules. Can you Please repost them.
Thank You. |
|
Re: River Falls FFA Alumni Pull July 14th/15th: 2 Day Pull
|
What are the rules for tractor
|
I also was on your link for the Boarderline Pulling Series.
What equipment must you have for both Pro Farm and Improved Farm Tractors ? I have 2 tractors. Thanks |
|
Borderline Rules
|
Registered: 06/14/2016 Posts: 52 |
Borderline Pulling Series 2018
Improved Farm (2.8 x 3) 10,500 11,000 ALL GENERAL RULES APPLY! Engine No RPM and speed limits. No block larger than 466 cubic inches. Engine head must be OEM for that brand and (no aftermarket heads). Factory exhaust manifolds only. OEM intake and factory replacements only. No homemade intakes of any kind. Turbo: Maximum of a 2.8 inlet by 3 inch outlet. Must be smooth bore. No slots or slugs unless using a 2.6 inlet by 3 inch outlet than Slots or Slugs are allowed. No inner or after coolers. Water injection is allowed only in the intake pipe. Diesel fuel only. OEM pump must match make and model of manufacturer. (Example John Deere A-Pump/IH Rotary Pump). Must have OEM appearing injection pump, no injection pump larger than A-Pump. No nitrous or propane allowed. No exhaust pipe larger than 4 inches in diameter. Must have cross bolts in exhaust pipe. Safety SFI steel flywheel, SFI approved scatter blanket or 3/8 inch plate surrounding the bellhousing (will be teched), wheelie bars, fenders, kill switch, 2.5 pound fire extinguisher, full roll cage with five point harness, if using a ROPS seatbelt is required, side shields recommended, air shutoff, and must have a spring loaded throttle that returns to idle. Must have a 3 way dump valve ahead of the injection pump operated by a cable. Electric Fan is required. DOT approved helmet required. Fire suit recommended. All competitors must sign a notarized affidavit as proof of having a SFI steel flywheel. Frame Block, driveline, transmission, rear axle and sheet metal must match the model of the manufacturer. No custom or component frames. Stock frame only. Tractors must have stock wide front end. Must have frame ties or a one piece frame. No tires larger than 20.8 x 38. No cuts or ground tire of any kind allowed. No aluminum rear rims allowed. Pro Farm (3x3) 9,500 10,000 ALL GENERAL RULES APPLY! Engine No RPM and speed limits. No block larger than 466 cubic inches. Engine head must be OEM for that brand (no aftermarket heads). No overhead cams, 2 valves per cylinder. OEM intake and exhaust manifolds. Turbo: Maximum of a 3 inch inlet by 3 inch outlet. Must be smooth bore. No slots or slugs. No inner or after coolers. United Pullers of Minnesota Certified Turbos allowed. Water injection allowed in the crossover pipe and ported water is allowed in the intake manifold only, not the head. Diesel fuel only, no injection pump larger than a P-Pump. No exhaust pipe larger than 4 inches in diameter. Must have cross bolts in exhaust pipe. All inline turbocharged engines are required to have one 3/8 inch thickness cable mounted between cylinders number 2-3 with 4 clamps at the splice, with no more than 4 inches of slack. Safety SFI steel flywheel, SFI approved scatter blanket, wheelie bars, fenders, kill switch, 2.5 pound fire extinguisher, full roll cage with five point harness, side shields, air shutoff, full firewall. Must have a spring loaded throttle that returns to idle. Must have a 3 way dump valve ahead of the injection pump operated by a cable. Electric Fans are required. SFI approved fire suit, helmet, gloves and shoes. All competitors must sign notarized affidavit as proof of having a SFI steel flywheel. Frame Block, driveline, transmission, rear axle and sheet metal must match the model of the manufacturer. Must have frame ties or a one piece frame. Maximum length of 13 feet from the center of the rear axle to the front of the tractor, including any type of weights. No tires larger than 20.8 x 38 cuts allowed. Aluminum rims allowed. |
|
Re: River Falls FFA Alumni Pull July 14th/15th: 2 Day Pull
|
JOYless
|
You seriously booked the lps class after a 3 tractor class last year? And booked the llss? yawn......... Limited pros have 10+ all the time, with Lindstroms, Sather, Miller, the Hastings tractors, a couple to the north, all close by, why wouldnt you book that class? |
|
Re: River Falls FFA Alumni Pull July 14th/15th: 2 Day Pull
|
Posts: 1,161 |
First of all it was 5 tractors in the Light Pro class. Second,more than likely no Limited Pro there is a Region 5 hook in New Hampton, IA which many WI and MN pullers attend as well as the BSTP having a Limited Pro hook in Darlington which won't draw any from the south. You also say that there are 10+ every time in a Limited Pro class, but this year is the first year for the Limited Pro class in the WTPA. 10+ show up at Regional National events, but no one really knows how many will show at a state level event. Miller's tractor is also for sale so we might not even see him out this year. The small Light Pro class is still fun to watch and hopefully maybe a couple more will be in the class this year. If you don't like the lineup don't go. Nobody is forcing you to go to a show you aren't going to enjoy. Just appreciate the hard work that goes into promoting a pull. By the way the LLSS are a fun and competitive class to watch no need to bash them. Hope you find a little more joy in your weekend JOYless. Brent Yaron Hooked Up Pulling Productions hookeduppullingproductions@gmail.com |
|
4.1 Class info
|
Registered: 07/27/2017 Posts: 17 |
So last year was the first year we had the WTPA come into River Falls and it was a success and our club enjoyed working with Kurt, Tammy, Roger, Tom, Shannon and crew. Our FFA voted to host the WTPA again this year over River Falls Days and when it was voted it was discussed to possibly add a 4th class as long as myself and a few other members could come up with the sponsorship money to pay for the class. At that time I contacted the WTPA to see what classes would be available that we could book but there wasn't any classes available being New Hampton Iowa had a pull the same weekend with Two Wheel Drive, Four Wheel Drive, Light Super Stock, Limited Pro Stock, and Minis. Then we contacted the United Pullers of Minnesota about Co Sanctioning the Pro Farm Class. The plan was to book the Pro Farm Class but then we got informed that New Hampton Iowa would be dropping some classes. I contacted the promoter from New Hampton to discuss which classes would work best for both pulls so that we could both have a successful pull the same night and it was decided that they would drop the Light Super Stock Class being most of the tractors our from Wisconsin....then we moved forward and booked the class. So long story short the Limited Pro Class was never available for our FFA to book in the first place! |
|
Re: 4.1 Class info
|
Another Puller!
|
So am I correct that you are having a light super stock class? If so what weight class? Alky and Diesel together? |
|
Re: 4.1 Class info
|
Posts: 1,161 |
NTPA rules for LSS as it is a WTPA sanctioned event. So yes, Alky and Diesel may run together at 6200 pounds I believe. Brent Yaron Hooked Up Pulling Productions hookeduppullingproductions@gmail.com |
|
Re: 4.1 Class info
|
Rich miller
|
I got a Harley and a side by side, tractor is the last thing coming out to play this summer.. |
|
New Website
|
Registered: 06/14/2016 Posts: 52 |
Check out our new website!!
[www.riverfallsffaalumni.org] |
|
Re: River Falls FFA Alumni Pull July 14th/15th: 2 Day Pull
|
Lol at the improved farm year limit. 1957 and older!???!?! Good luck !!! Was going to get a group of 4/560s together and come down but can’t now! What a joke....
Good job at ruining the River Falls pull. |
|
Re: River Falls FFA Alumni Pull July 14th/15th: 2 Day Pull
|
billee,
|
the pull was ruinedfor antiques when seperated from the Saturday pull ,two improved last yr. no one comes now. |
|
Re: River Falls FFA Alumni Pull July 14th/15th: 2 Day Pull
|
billee,
|
the pull was ruinedfor antiques when seperated from the Saturday pull ,two improved last yr. no one comes now. |
|
Pull Order for Sat Night
|
Registered: 06/14/2016 Posts: 52 |
NTPA/WTPA Start Time - 6pm
Should be done approximately 8pm After the WTPA pull is done we will jump right into our brush pull. There wont be a 30 minute break like there was last year. FFA Pull Start Time - Approximately 8pm Class Order Viper Sled 6500 Open 10500 Improve Farm 9500 Pro Farm 8500 Open 8000 Diesel Pickup Open 7300 Open 11000 Improve Farm 10000 Pro Farm 9500 Open 8500 Hot Street Diesel Pickup Track Patrol Sled 8500 Stock Street Diesel Pickup 11000 Farm Stock Turbo 12500 Farm Stock Turbo 14000 Farm Stock Turbo |
|
Re: Pull Order for Sat Night
|
FOOLISH PLEASURE
|
Can you tell me in the 6500 open, and 7300 open do I have to have 24.5 tires or can I run 30.5? Thanks |
|
Re: Pull Order for Sat Night
|
Registered: 01/10/2016 Posts: 183 |
Pete, open should be open. See you Saturday. |
|
Re: Pull Order for Sat Night
|
LLSS
|
1- 3x3 max turbo.
24.5x32 max tire. Diesel only. Not much of an open class. |
|
Re: Pull Order for Sat Night
|
let um run
|
They should just make the class open. Why do these brush pulls need a class for everyone? No one wants to get beat but whats one more tractor in the class he might not even run or might make a mistake messing up his hook. Plus its one less class to pay out isn't that why they are having a pull to raise money for the FFA Alum.? |
|
Re: River Falls FFA Alumni Pull July 14th/15th: 2 Day Pull
|
Posts: 159 |
57' and older? Seriously? That would be half your improved class. And the no shifting the torque during the pull is kinda bullshit too, sorry I chose the right brand to pull with. |
|
Rules
|
Registered: 06/14/2016 Posts: 52 |
1- 3x3 max turbo.
24.5x32 max tire. Diesel only. Not much of an open class. We have had the the same 6500/7300 Open classes with these rules for years. If the guys in the area have changed there tractors differently then the current rules we have we apologize as we were unaware of any different rules. If anyone feels we need to change rules please contact Ryan or Pete. We can discuss this at the drivers meeting also For further information contact: Ryan Joy at 715-821-7676 or Pete Lubich 715-821-7800 |
|
Re: Rules
|
Rules
|
Let us know if you change rules ahead of time, don't wait until the drivers meeting, Colfax also has a pull that night. |
|
Rules Changes - 7300 Open
|
Light Open
6500 1. ALL GENERAL RULES APPLY 2. ALL GENERAL SAFTEY EQUIPMENT REQUIRED 3. Engine block cannot be modified externally in anyway. Only one injection pump allowed. Intercoolers allowed. No nitrous allowed. Only one fuel allowed. Up to a P Pump allowed. Alcohol not allowed. 4. Restricted to a max 3x3 single turbo. 5. Max tire size of 24.5 x 32 (same rules as posted on website) Light Open 7300 New Rules 1. ALL GENERAL RULES APPLY 2. ALL GENERAL SAFTEY EQUIPMENT REQUIRED 3. Engine block cannot be modified externally in anyway. Only one injection pump allowed. Intercoolers allowed. No nitrous allowed. Only one fuel allowed. Up to a P Pump allowed. Alcohol allowed. 4. Can use multiple turbos. |
|
New Classes Sunday Pull: 5500/6500
|
Do to all the requests on the Improved Farm Classes we will be adding a 5500/6500 Improve Farm Classes for the 1958 and newer tractors for the 460 IH and whatever else is newer then 1958
The class will be 75% payback of the total entry fee's for 1st Place Only! Improved Farm Stock – Tractors 1958 Newer 5500 6500 7 mph 1. General rules apply 2. Tractors must have a stock appearing block, frames, transmission, rear end, and axle housing for the manufactures make and model. Cast cylinder head and their replacements are to remain unchanged in outside appearance. No 800 Minneapolis Moline components. After market cast iron manifolds allowed. 3. Maximum tire size 18.4x38, top cut only. 4. Side shields allowed. Rear fenders and electric fan are recommended. Scatter shield, wheelie bars and kill switch recommended but required next year!!!!! 5. Can run over up to 20% over stock RPM’s. 6. Hitches max 20” height. No closer then 18” from the center of the rear axle drawbar hole 7. No down draft, tank or airplane carburetors unless originally factory equipment. John Deere lettered series tractors can have a duplex carburetor. For further information contact: Ryan Joy at 715-821-7676 or Pete Lubich 715-821-7800 |
|
Sunday Class Order
|
Class Line Up for Sunday
Track Patrol Sled Antique Farm Stock 4500 Farm Stock 4500 Improve Farm Stock Tractors 1957 Older 4500 Antique Farm Stock 5500 Farm Stock 5500 Improve Farm Stock Tractors 1957 Older 5500 Improve Farm Stock Tractors 1958 Newer 5500 Antique Farm Stock 6500 Farm Stock 7500 Improve Farm Stock Tractors 1957 Older 6500 Improve Farm Stock Tractors 1958 Newer 6500 Farm Stock 9500 Farm Stock 10500 Just added 10,500 class which is 75% payback of the entry fee's for 1st Place only |
|
Re: Rules Changes - 7300 Open
|
Registered: 01/10/2016 Posts: 183 |
Thanks for the change to 7300 open. I will plan on hooking in the class. Thanks again. |
|
Online Pre Registration
|
Registered: 06/14/2016 Posts: 52 |
We have pre registration available online for our FFA pull on our website. Links below
Thanks Truck Registration [www.riverfallsffaalumni.org] Saturday Tractor Registration [www.riverfallsffaalumni.org] Sunday Tractor Registration [www.riverfallsffaalumni.org] |
|
River Falls Saturdy night results,
|
Joey
|
who won 9500 Open in River Falls Saturday night,thanks. |
|
Re: River Falls Saturdy night results,
|
allis200
|
Scalzo's Bad to the Bone. Very impressive run. |
|
River Falls Saturdy night results,
|
Joey
|
who won 9500 Open in River Falls Saturday night,thanks. |
|
Re: River Falls Saturdy night results,
|
Disqualified ?
|
Who was disqualified in the 10,000 or 11,000 # Improved classes ?
I heard it was a guy from Rice Lake ? Was he a member ? If it was a 1066 . It pulled like there was nothing behind it !! WOW ! |
|
Re: River Falls Saturdy night results,
|
Yup DQ'd
|
Yup class is 2.8 smooth bore by 3 in exhaust.
Not a member He runs a slotted cover and openly admits It. Folks at Borderline stuck to their guns on the class rules. |
|
Re: River Falls Saturdy night results,
|
little more
|
found more then that slotted turbo makes 50 more hp you don't put 150 feet on with 50 hp. |
|
Re: River Falls Saturdy night results,
|
Disappointed Fan
|
If Borderline continues to stick to their guns, there will no longer be an Improved class. There has only been 4-6 Improved tractors at their last 3 pulls. Are they gonna continue to kick out everyone that beats them that aren't Borderline? In my opinion Borderline has been putting on @#$%& shows. Why are people allowing them to run the brush pulls? |
|
Re: River Falls Saturdy night results,
|
Same pull?
|
Were we watching the same pull? There were a total of 7 tractors in 10500 and 11,000. The 1066 pulled and snuffed out and a cabbed deer went past him and clutched it. The next class he "got first" and the deer had a sh*t hook and got them by 8 ft. The 2.8x3 class is suffering everywhere. Borderline synced up their rules with the RPM group |
|
Re: River Falls Saturdy night results,
|
Crybabies
|
Wait until Friday night do you want to see a @#$%& show Glenwood city |
|
Re: River Falls Saturdy night results,
|
Crybabies 4 sho
|
Yeah he was. Had the whole family back there during pissin match to defend his illegal turbo |
|
Re: River Falls Saturdy night results,
|
So what hapens now @ all pulls ?
|
Did Boarderline Pulls tell them not to come back ?
I think they should be NOT allowed them at any pull after I saw the pissin match !! With people like that it recks the "Improved Farm Class" 10,500 & 11,000." It's was a Good Class with Red against Green ! Wonder if Glenwood City will let them pull if they go. If I were them I would STAY home. |
|
Re: River Falls Saturdy night results,
|
Meet the rules
|
From what I heard from people that were at the pissin' match it was simply put meet the rules or don't come pull expecting a payout. Pull exhibition if you cant meet rules. Pretty simple stuff |
|
Borderline Rules
|
Registered: 07/27/2017 Posts: 17 |
All you responding on here without a name needs to grow up!! First of all for those that don't have a clue what your talking about the Borderline Pullers was formed to try and get local pulls in this area to bring them in so we could all stick to the same rules and try and keep the Pro Farm/Improve Farm Classes with fair rules. Now if anyone wants to be mad at anyone for the rules Borderline has then scream at me! Myself and another member of my FFA Alumni help out the Borderline Club come up with the rules for the Pro Farm/Improve Farm Classes. These rules were never meant to single anyone out, or meant to have certain rules for certain tractors. We simply tried our best to get some common rules on both these classes to make it fair to everyone. Now is everyone going to be happy no, that will never happen. Too much politics in this sport but the thing pullers fail to realize if you don't get some common fair rules for both of these classes there going to die off cause either pullers will lose interest, jump into NTPA or flat out quit pulling. Look at the Hobby class that we use to have around here. It got outta control and the class died off. The Pro Farms are pushing 1200 HP and these Improve tractors are anywhere from 800 to 1000HP and these parts keep improving year after year. So common sense tells you that you need to control these classes somehow our they will get outta control which they already are. The other issue with these classes pullers don't understand is the safety side of it. Look at all the tractors without cages, proper scatter blankets, fuel shut off's, kill switches....ect ect. It wasn't bad five years ago but like I said before these tractors are pushing way more HP and all its going to take is once accident and someone gets killed and were all going to be done brush pulling around here cause you wont be able to afford the insurance. Where's the common sense?
As far as the guy with the slotted turbo at our pull I told him he could pull for fun so I'm not sure how things get turned around |
|
Re: Borderline Rules
|
Registered: 02/26/2018 Posts: 10 |
Mr. 2 cents I was there and my Turbo was a 3x3 and I was told if I planned on pulling with you guys again to have the correct Turbo ok fine
But you can't possibly tell me that Deere was legal. I'm gonna buy a turbo to fit your class but the first tractor it will go on is Andy's because he's done his home work and built a fine running tractor then we'll see what you have to say. That's my 2 cents |
|
Re: Borderline Rules
|
Andy hasn't done @#$%& to that tractor all he had to do is hand over his check book,actually I should say the banks checkbook. his head is bigger than anybody else I know. cant wait till he gets beat.its coming. good luck. |
|
Re: River Falls Saturdy night results,
|
2cents
|
Really @#$%& shows??? They keep it fair
So people like Andy don't wreak it He is the issue! He was told to Fix problems 6 weeks prior. 7 hooks more hooks than you 3 Hook brush pulls your talking about Grow some balls and see your family Was wrong! Pretty easy to see who You are. Everyone was tached and and only One did not pass.... |
|
Re: River Falls Saturdy night results,
|
dont matter
|
glenwoods turbo size is 3x3 it will not matter there . |
|
Re: River Falls Saturdy night results,
|
2cents
|
Drunk McGee still run it |
|
Thanks to Sponsors
|
Registered: 06/14/2016 Posts: 52 |
The River Falls FFA Alumni would like to thank everyone that came to the River Falls Day Pull! Thank you fans, pullers, promoters, and sponsors!!!
Thank You to Total Excavating - Chris Kusilek for making this location happen! Chris did an awesome job with the site preparation and the track was once again awesome! 2018 River Falls FFA Alumni Sponsors Total Excavating Value Implement Compeer Financial Minnesota Ag Group - Hastings Fuel Lift Kinni Sports and Power Mel's Steiner Plumbing Electric Heating Inc South Fork Cafe Winfield United Darrel's Septic Service Devine Liquor Countryside Coop Deiss Storage Systems RCD Western Wisconsin Ag Supply First National Bank River Falls Stunzya Hanson Construction Kwik Trip Plumber Concrete River Falls State Bank Glass Express Ace Ethanol Advanced Auto Care Auto Value Bernard of River Falls C&J Builders Advanced Auto Parts Comfort Plus Insulation H&F Home Furnishings Hove Auto Body Johnson Quality Plumbing O'Reilly Auto Parts Pechacek's General Contracting Reliance Electric Motors River Falls Mutual Insurance River Falls Tire St Croix Tax Steel Town Westconsin Credit Union Ace Hardware Frontier Ag Turf – New Richmond BP of River Falls Munson Hybrids Pro Ag Consulting Nexgrow Mainstreeters Henkel Veterans Services Royal Credit Union Our Town Has It Air Motion Systems Inc Fair Valley Performance Main Street Family Dental O’Keefe Inc Servant of the Shepherd Church Shannon Crop Services Sweeds Service Keyes Chevytown O’Malley Custom Ag Next Level Events Ziegler Cat Guy and Tom Jensen Goodwin Farms Jason Fall Lackey Designs County Materials Midwest Ag Supply River County Cooperative Luther Hudson Chrysler ABM Pondering Gardens All State Ag Parts Thunder Country Miller Matzek Construction Kobussen Buses Billy Delander Painting River Valley Pedal Pullers Blackhawk Garage Doors Lynn Johnson Reeds Lawn Care Clatters Tractors Afdahl Agronomy American National Insurance – Justin Strand Applied Designs & Signs Midwest Pest Control Clark’s Farrier Service Hastings Coop Creamery Jerry’s Auto and Truck Repair Mississippi Welders Supply River City Stitch Walk On Therapeutic Riding Homestead 1Farms Rick & Nancy Banes Farms Hanson Farms Pure Sun Farms Kosin Farms Bennet Farms Lance & Jared Nelson Farms Dallman Brothers Farms Dennis O’Malley Farms Kauphusman Farms Frogman Farms We would like any feedback we can get to better help our FFA Alumni improve things for next years pull! Any feedback we can get would be greatly appreciated! For Pull Feedback Contact Below: Thanks!! Text Ryan: 715 821 7676 Keith: 715 684 9241 Email: rf.ffa.alumni@gmail.com Thanks again for all of the support! River Falls FFA Alumni |
|
Re: River Falls Saturdy night results,
|
Nick Gerdes
|
I've been keeping up on this post and it's pretty funny. I own the John Deere 4250 that pulled in River Falls. Nice venue and nicely ran. We pull with the RPM group. (Renegade Pullers of Minnesota) we run 9 pulls for points. Borderlines rules are base off of the RPM group. We're teched for 2.8 smooth bore intake by 3 exhaust. Factory appearing pump (A pump) and 466 cubes. Nick Graves teched us Saturday night right off the bat. So yup. We're legal |
|
Re: River Falls Saturdy night results,
|
Registered: 01/19/2010 Posts: 260 |
Nick are you planning to pull in Howard Lake? it would be nice to see some of you RPM guys at the Wright County Fair.  
|
|
Re: River Falls Saturdy night results,
|
Nick Gerdes
|
When is it? Have a class for our 410 tractor? |
|
Re: River Falls Saturdy night results,
|
Registered: 01/19/2010 Posts: 260 |
It is on Sunday July 22. Pull starts at noon. Wright County Fair.org is the Web site for pull information. I know they run a 9000lb out of the field with no rpm limit. check it out. Howard Lake usually has a good sled and track.
|
|
Re: River Falls Saturdy night results,
|
Nick Gerdes
|
Not sure if we'll make it up there or not. Our 4000 wouldn't fall into farm stock |
Website Statistics
Global: Topics: 38,648, Posts: 229,717, Members: 3,325.
This forum: Topics: 37,068, Posts: 225,907.
Global: Topics: 38,648, Posts: 229,717, Members: 3,325.
This forum: Topics: 37,068, Posts: 225,907.
Our newest member JD_8520
