Case 504 More Cubes
|
Case
|
Hey guys, looking for information on how to put a larger piston in the Case 504 engine.
Class doesn't have cubic inch limits - would like to take advantage of the 5" stroke and put a bigger piston in the engine to try to get it closer to the 6030/619 pullers. Has anyone changed the sleeves/pistons for another set? How much boring can be done to the block without compromising anything? Not looking to stroke the crank at this time. Any knowledge shared is appreciated!! Thanks! |
Re: Case 504 More Cubes
|
xxx
|
do the bore and stroke,cam and pump,or else all is wasted,just cubes doesn't do it.cheaper in the long run to make it stout first time around.Stroke makes a BIG difference.Buddy of mine does the Cases,send number will share some info. |
Re: Case 504 More Cubes
|
Case
|
What's your email? or what's the contact number to call him??
I haven't found anything anywhere about bore/piston change... Thanks |
Re: Case 504 More Cubes
|
Case
|
Bump... anyone?? |
Re: Case 504 More Cubes
|
xxx
|
He says stroke only for best gain,not bore.if you want his info post number please, |
Re: Case 504 More Cubes
|
Case
|
I don't like to post my phone number on public forums.
Please email me the contact info at bbjd6101@gmail.com Thanks! |
Re: Case 504 More Cubes
|
Registered: 03/17/2011 Posts: 191 |
How much you want to spend? With cubes need better everything, pump, turbo, injectors, heads
50,000 be a rough estimate |
Re: Case 504 More Cubes
|
Registered: 06/07/2011 Posts: 11 |
I believe 5" pistons on factory crank gets you to 588. Stroke crank can get 640 with 5". |
Re: Case 504 More Cubes
|
Case
|
Pump, turbo, injectors were already tried... didn't get it done. Now looking at other options.
What sleeves/pistons combo are used for 5''?? Or do you have to have some made by Ross or another company? |
Re: Case 504 More Cubes
|
Registered: 08/09/2015 Posts: 36 |
Go with a 6" stroke, block will need light clearancing and some on camshaft but best gain per dollar. just that puts you at 600 cubes. Then it you go to a 4 3/4 piston with a good liner you dont need any boring done in the block that combination yields 640 cubes. perfect setup for 3-3500 rpm. You can run open rpm but will need a billet crank for that. |
Re: Case 504 More Cubes
|
Case
|
So there isn't a good option for just drop in / light machine work "big bore" kit?
Can you hone the factory 504 liner from 4.625 to 4.75" or do you have to use a different liner altogether? |
Re: Case 504 More Cubes
|
Registered: 08/09/2015 Posts: 36 |
The factory liners arent very strong to start with. Go with a good liner like powerbore for 4 3/4 |
Re: Case 504 More Cubes
|
Question for Case
|
Is there a pump and turbo limit? Can you run an intercooler? How about an rpm limit? |
Re: Case 504 More Cubes
|
Case
|
No limit really. 3000RPM "farm stock" - non cut tires. Factory cooler is fine. |
Re: Case 504 More Cubes
|
will this work
|
"Case", Look at the Case 2870 Saab-Scania engine specs, which is close in bore, stroke & cubes that you want. However, does it flywheel pattern allow bolting right into the 504 clutch housing pattern? And if it does, is that a legal motor for your class? |
Re: Case 504 More Cubes
|
puller
|
bump / any replys to this ?? i would like to know |
Re: Case 504 More Cubes
|
up river
|
CASE WONDERING WHICH ROUTE YOU USED TO GET MORE CUBES OUT OF YOUR MOTOR AND HOW WAS END RESAULT? |
Re: Case 504 More Cubes
|
call elmers in ks. |
Website Statistics
Global: Topics: 38,348, Posts: 231,039, Members: 3,445.
This forum: Topics: 37,377, Posts: 227,784.
Global: Topics: 38,348, Posts: 231,039, Members: 3,445.
This forum: Topics: 37,377, Posts: 227,784.
Our newest member John S