4010 gas puller June 04, 2019 12:19PM
Has anyone ever put a belt driven supercharger on a 4010 gas Engine
Reply Quote

Re: 4010 gas puller June 04, 2019 01:23PM
Bruce Hallman, Ayr, Ontario, used a 6-71 mounted on the side of the alky engine, for a few years in mid '70's. It's a unique sound. Then switched to turbo. Pulled 5 & 7. He's been deceased for many years.
Reply Quote

Re: 4010 gas puller June 06, 2019 12:50PM
Butch Franzen from Waverly, IA used to pull a supercharged deere back in the day with the N.E. Iowa tractor pullers. It had some help from Don Storjohann, it was a cool tractor, I have video of it also if I could ever get it converted from vhs.


Reply Quote

Re: 4010 gas puller June 07, 2019 02:21PM
I went to put a 4010 gas in the LLSS class with a blower on it I need some help
Reply Quote

Re: 4010 gas puller June 07, 2019 03:00PM
you can't put a blower on one any were i know of unless your s0 called blower is a turbo i can help with a meat grinder and have a nice set of aluminum rods 93/4 inch long for a JD .Give me a call 270 566 2901



Edited 1 time(s). Last edit at 06/07/2019 03:01PM by Lewis Conner.
Reply Quote

Re: 4010 gas puller June 10, 2019 12:53PM
Where in any rule book dose it say no belt driven super chargers
Reply Quote

Re: 4010 gas puller June 11, 2019 01:51AM
LLSS class rules for WTPA, see rule 6.



Light Limited Super Stock Class
All NTPA OEM chassis superstock rules, including shielding, safety and SFI requirements including roll cages apply to this class plus the following rules.
Class weight 6250 Ibs.
Engines
1. Blocks and crankcase shall be the same manufacturer or factory replacement.
2. Engine must match brand of tractor.
3. Rear of engine must be in stock location for make and model of rear end and transmission housing, with a maximum tolerance of a 1” adapter plate.
4. No V-8 engines allowed.
5. Cylinder heads must be the OEM manufacturer casting for said tractor and engine block or factory replacement block at the time of manufacture. Original casting must be retained. Porting and polishing of the original ports is allowed. Modifications to the cylinder head(s) to accept for billet, casted, recast, molded or any other kind of insert is NOT allowed. Cylinder heads limited to two valves per cylinder. No overhead camshafts allowed.
6. Use of supercharger(s) is not allowed.
7. Maximum of 370 cid (+ or – 1 percent) for single turbo charged alcohol engines. No intercoolers allowed.
a. Turbocharger(s) shall not exceed a 3” inlet and a 4” outlet measured at the face of the wheels. No “step down” intake housing, exhaust housing or wheels of any kind allowed. The intake wheel and exhaust wheel must protrude into the maximum allowed inlet and outlet dimensions at least 1/8”. No secondary source of air and no slots of any kind allowed. Housing slots must be permanently disabled by being welded shut. No temporary inserts or plugs allowed.
8. Maximum of 315 cid (+ or – 1 percent) for twin turbo charged diesel engines. Intercoolers allowed.
a. Turbocharger(s) shall not exceed a 3” inlet and a 4” outlet measured at the face of the wheels. Slot cannot feed inlet face of wheel and .200 MAF enhancement allowed.
9. Maximum of 410 cid (+ or – 1 percent) for single turbo charged diesel engines. Intercoolers allowed.
a. Turbocharger(s) shall not exceed a 3” inlet and a 4” outlet measured at the face of the wheels. Slot cannot feed inlet face of wheel and .200 MAF enhancement allowed.
Reply Quote

Re: 4010 gas puller June 10, 2019 09:44PM
I can help with that.

Shoot me a message.

CP
Reply Quote

Re: 4010 gas puller July 21, 2019 11:29PM
I pull a 4010 gas NA Do you know anybody that works on heads for them??
Reply Quote

Re: 4010 gas puller July 23, 2019 09:42AM
I 270 566 2901 Lewis Conner
Reply Quote

Re: 4010 gas puller July 19, 2019 03:08PM
I would LOVE to see the video of that tractor. I saw it pull back in the day and it definitely had a sound of it's own. If you can email the video I would be sooooo thankful!!

Gary
Reply Quote

Re: 4010 gas puller July 22, 2019 04:00AM
Quote
t-puller
Butch Franzen from Waverly, IA used to pull a supercharged deere back in the day with the N.E. Iowa tractor pullers. It had some help from Don Storjohann, it was a cool tractor, I have video of it also if I could ever get it converted from vhs.

I will eagerly be waiting to see a video of Franzens tractor..Thanks..
Reply Quote

Newer Topic Older Topic

Author:

Your Email:


Subject:
Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message:
Website Statistics
Global: Topics: 38,771, Posts: 229,938, Members: 3,338.
This forum: Topics: 37,096, Posts: 226,027.

Our newest member Jacklovik2009