10:00:40am, Sunday, May 19, 2024
Deere 466 A to P pump swap
|
Registered: 03/03/2017 Posts: 22 |
What does it take to swap a 6466 Deere from an A pump to a P pump? Will the P bolt in place of the A with the P gear or is the block different? |
Re: Deere 466 A to P pump swap
|
Registered: 03/03/2017 Posts: 22 |
Anyone? |
Re: Deere 466 A to P pump swap
|
Registered: 03/28/2021 Posts: 1 |
The short answer is no, a P pump will not 'bolt on' an A pump block. |
Re: Deere 466 A to P pump swap
|
Registered: 09/06/2017 Posts: 33 |
Blocks are different. Hole for pump hub are different size and bolt pattern is bigger for p series pump. You will have to enlarge the hole and drill tap block for the new bolt pattern. It has been done and is semi common practice I would say |
Re: Deere 466 A to P pump swap
|
Registered: 10/19/2011 Posts: 21 |
Another way is to check with an ADS station, they may be able to machine the front bearing plate of the 'P' pump to fit the 'A' pump hole so the hole in the block doesn't have to be machined. You will need to drill and tap new holes for the 'P' pump mounting and will have to use a P pump gear. I know Columbus Diesel Supply used to do this kind of work, did this to ours. |
Re: Deere 466 A to P pump swap
|
Registered: 04/30/2008 Posts: 174 |
if it is a p3000, you can machine the bearing plate down to fit the pilot hole in the block, your oring groove will be gone, but just use a small amount of sealer,,works fine |
Re: Deere 466 A to P pump swap
|
Registered: 01/16/2014 Posts: 55 |
I have done it. like diesel greaser says. I believe fair valley helped me |
Website Statistics
Global: Topics: 38,779, Posts: 229,957, Members: 3,338.
This forum: Topics: 37,098, Posts: 226,040.
Global: Topics: 38,779, Posts: 229,957, Members: 3,338.
This forum: Topics: 37,098, Posts: 226,040.
Our newest member Jacklovik2009