11:44:35pm, Sunday, May 05, 2024
Hilborn Pump
|
Curious
|
Just setting up a new tractor LLSS on Alcohol. 370ci . What size hilborn pump should I be looking for ? Thanks |
Re: Hilborn Pump
|
Anonymous User
|
PG175 - 4 works great on my set up |
Re: Hilborn Pump
|
LLSS
|
How many bypasses do you run with that pump? |
Re: Hilborn Pump
|
Anonymous User
|
Not sure what you are asking. Main by-pass, Idle circuit plus two additional stages. (3 stage system).
PG-175B-4 pump is about $700. Seems like it flows about 12 gpm if I remember correctly. |
Re: Hilborn Pump
|
LLSS
|
I think the -4 is 15gpm and the -2 is12 gpm |
Re: Hilborn Pump
|
Anonymous User
|
Don't know for sure, but I thought it was the other way around, I could be wrong, but I thought 0 flowed more and the bigger the number the smaller the flow. Like I said I don't know for sure. I know guys in LLSS that run 2 and 4, I run a 2. Some also run the Watermans like the LSS only smaller, and there is a new either 990 or 1100 from Kinsler or Enderle that should work well. Genes Machine Shop is a great place to get anything you need and also they can get close to the combo your engine needs just from you telling them what setup you fun. |
Re: Hilborn Pump
|
Anonymous User
|
-4 is bigger |
Re: Hilborn Pump
|
Registered: 03/26/2008 Posts: 494 |
A good -2 is about11.5 to 12 gpm and the -4 is about 15. I too thought the original answerer would have to run some type of bypass off the pump. The Enderle 990 is about equivalent to the -2 and the 1100 is about equivalent to the -4 if memory serves me right. JW |
Re: Hilborn Pump
|
Enderle 110 12GPM= PG175-2 Hilborn
Enderle 990 15GPM = PG175-4 Hilborn Enderle 1100 17.2 GPM Enderle 1200 18.8 GPM |
Re: Hilborn Pump
|
HP
|
My Hilborn PG175-4 flowed in the 18 gpm range. (4000 pump rpm,,,,8000 engine rpm).
If I had it to do over, I would get a Waterman. More efficient (more gpm) at lower rpm than HIlborn or Enderle. |
Re: Hilborn Pump
|
Moderator Registered: 03/27/2008 Posts: 1,151 |
get a PG 250 - 5 Hilborn if you want more gpm at the same rpm.
It's not a matter of manufacturer but the pump model used.... Floating Finish - the German Tractor Pulling Web Show and EU Live Streams: [www.youtube.com] |
Website Statistics
Global: Topics: 38,704, Posts: 229,805, Members: 3,330.
This forum: Topics: 37,081, Posts: 225,952.
Global: Topics: 38,704, Posts: 229,805, Members: 3,330.
This forum: Topics: 37,081, Posts: 225,952.
Our newest member LT Limited Pro