SBJD oil circuit modification ideas March 01, 2023 12:37AM
Looking for ideas or better yet already available items for two modifications.

First: Does anyone sell an adapter to move the stock filter manifold (30/40) back to make access to the fuel adjustment?

Second: Am using the stock crank driven oil pump. Not investing in external pump. But would like to eliminate the internal oil cooler steel lines. Remove cooler bypass and some way to permanently plug the ports on the pump?

Thanks
Reply Quote

Re: SBJD oil circuit modification ideas March 01, 2023 01:05AM
I have billet oil cooler eliminator blocks $75.00
Reply Quote

Re: SBJD oil circuit modification ideas March 01, 2023 03:06AM
whats your number
Reply Quote

Re: SBJD oil circuit modification ideas March 01, 2023 02:12PM
Click on his name. His profile, including phone number comes up
Reply Quote

Re: SBJD oil circuit modification ideas March 01, 2023 03:01AM
I am looking for a oil cooler eliminator block fo 7.6 with veritcal oil cooler. 507-412-nine three nine seven. text is good thanks
Reply Quote

Re: SBJD oil circuit modification ideas March 01, 2023 03:32AM
I was always told on your first question there to use a jd 4320 oil filter , if you remove the filter you have all sorts of room to get the pump off, being the filter is mounted vertical rather than horizontal.
Reply Quote

Re: SBJD oil circuit modification ideas March 01, 2023 04:52AM
Paul Marlatt 7six5-938-222sevin
Reply Quote

Re: SBJD oil circuit modification ideas March 01, 2023 08:11AM
I want to be able to adjust fuel setting without removing the filter from the manifold. And want to eliminate the 2 steel tubes on the inside of the oil pan that mount into the oil pump/block. Not just cap it off on the left outside.
Thanks
Reply Quote

Re: SBJD oil circuit modification ideas March 03, 2023 03:27AM
For your oil filter problem, just use a '60series (45,47,4960)
Reply Quote

Re: SBJD oil circuit modification ideas March 05, 2023 01:14AM
Idk if anyone makes the piping internally, but I welded up some tubing to go from the pump directly to the filter housing on an 8.1. I have pictures of it somewhere.
You could also use the filter setup off an 8.1, I believe it’s similar to the 60 series as well.
Reply Quote

Newer Topic Older Topic

Author:

Your Email:


Subject:
Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message:
Website Statistics
Global: Topics: 38,643, Posts: 229,709, Members: 3,325.
This forum: Topics: 37,067, Posts: 225,903.

Our newest member JD_8520