10:30:43pm, Sunday, April 28, 2024
Datalog RPM sled box
|
Have a new datalog sled RpM box. It has a 12 volt relay port I bought a Small wire LED strobe light to wire into that it came with a extra pigtail that plugs into that port that is two wire but when I wire up to the box can’t get it to work? I’ve tried a multimeter as well Anyone have any suggestions thanks in advance |
Re: Datalog RPM sled box
|
Registered: 04/06/2008 Posts: 263 |
That’s a charge port (power in not power out) |
Re: Datalog RPM sled box
|
Mine has 3 on it one for charging one for RPM out and one labeled 12V/relay which was told was to put a horn or a Light on |
Re: Datalog RPM sled box
|
An Idea
|
Maybe the light won’t come on until the RPM input is out of range?
A normally open relay instead of a normally closed one. |
Re: Datalog RPM sled box
|
Registered: 07/22/2014 Posts: 197 |
Does anyone have the correct manual for this, the sled box? Not the data logger system.
Thanks |
Re: Datalog RPM sled box
|
Registered: 07/22/2014 Posts: 197 |
Pins 9+ (positive) and 4- (negative) on the 12 volt/relay bulkhead operate the external light/alarm. But only puts out 5 volts. At least on the one I tested. Should still operate most 6 volt relays. But will drain the internal battery a lot faster when activated. |
Re: Datalog RPM sled box
|
3010JD. Would you be able to Text me 330/440/5578. I’d like to discuss some more on this as I play with our system during the off systems thanks |
Website Statistics
Global: Topics: 38,642, Posts: 229,708, Members: 3,325.
This forum: Topics: 37,067, Posts: 225,903.
Global: Topics: 38,642, Posts: 229,708, Members: 3,325.
This forum: Topics: 37,067, Posts: 225,903.
Our newest member JD_8520