Datalog RPM sled box April 30, 2023 12:55PM
Have a new datalog sled RpM box. It has a 12 volt relay port I bought a Small wire LED strobe light to wire into that it came with a extra pigtail that plugs into that port that is two wire but when I wire up to the box can’t get it to work? I’ve tried a multimeter as well Anyone have any suggestions thanks in advance

Re: Datalog RPM sled box April 30, 2023 02:23PM
That’s a charge port (power in not power out)

Re: Datalog RPM sled box April 30, 2023 11:52PM
Mine has 3 on it one for charging one for RPM out and one labeled 12V/relay which was told was to put a horn or a Light on

Re: Datalog RPM sled box May 01, 2023 01:46AM
Maybe the light won’t come on until the RPM input is out of range?

A normally open relay instead of a normally closed one.

Re: Datalog RPM sled box December 01, 2023 03:55PM
Does anyone have the correct manual for this, the sled box? Not the data logger system.
Thanks

Re: Datalog RPM sled box December 03, 2023 05:18AM
Pins 9+ (positive) and 4- (negative) on the 12 volt/relay bulkhead operate the external light/alarm. But only puts out 5 volts. At least on the one I tested. Should still operate most 6 volt relays. But will drain the internal battery a lot faster when activated.

Re: Datalog RPM sled box December 10, 2023 06:06AM
3010JD. Would you be able to Text me 330/440/5578. I’d like to discuss some more on this as I play with our system during the off systems thanks

Author:

Your Email:


Subject:


Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message:
Website Statistics
Global: Topics: 38,641, Posts: 229,707, Members: 3,325.
This forum: Topics: 37,067, Posts: 225,903.

Our newest member JD_8520