10:00:18pm, Saturday, May 18, 2024
Muscoda, WI, Backtop pull, rules and classes.
|
Anonymous User
|
Muscoda Mushroom Fest
Tractor Pull rules and weights. Sunday, May 16, 10am, Sharp! In front of the Riverdale high school. Class order: (subject to change) 4,500 antique, 10% overstock rpms, 18.4-28 tire limit 5,500lbs open antique, 18.4-38 tire limit, 7mph 8,500lbs N/A farm, non-turbo- 4cylinder turbo, 18.4-38 tire limit, 7mph 10,000lbs farm, 20.8-38 tire limit 7mph 11,500lbs Improved farm, 18.4-42 or 20.8-38 tire, gear limit 5,500 antique 6,500 open antique 7,500 N/A farm 12,000lbs farm 9,500lbs N/A farm (Improved farm if needed) 14,000lbs farm 12,500lbs improved farm 16,000lbs-up farm 1. No hot rodding in the streets or pits, violators will be asked to leave without reimbursement. 2. Only two classes per driver. 3. All Farm classes will be at 2750rpms, Open/Improved classes 3000 rpms, no exceptions. 4. Any tractor is subject to rpm checks at anytime, refusal will be automatic disqualification without reimbursement. 5. All tractors running 3000rpms must run steel clutch and flywheel, no exceptions. 6. Passing pace tractor is automatic disqualification. 7. All parts, weights, brackets, etc., that fall off the tractor during the pull will cause automatic Disqualification. 8. No weights on the driver platform or any place that can hurt the control of the driver. 9. Drawbar height is 20inch farm classes and 18inch antique classes. 10. There will be a beer tent at the pool, but parking will be at the school meaning NO alcohol on the grounds. 11. Any driver that consumes alcohol before their pull will be ask to leave without pulling. 12. Officials reserve right to move tractors to Improved farm if felt that tractor performs better then tractor should for the previous farm class to keep fairness in farm classes. 13. Officials word is final. Question or comments call, (608) 739- 4089 |
Re: Muscoda, WI, Backtop pull, rules and classes.
|
Anonymous User
|
what is the tire size for 5500 antique? is antique 1958 and older? |
Re: Muscoda, WI, Backtop pull, rules and classes.
|
harvester-of-sorrow
|
did you mean 16.9x28 and or 15.5x38 for antique? |
Re: Muscoda, WI, Backtop pull, rules and classes.
|
Anonymous User
|
i thought antique tractor the tire size was 16/9 /28 and 15/5 /38 that was agred at the reedstown i will not if it is 18-4 i will not have on competing |
Re: Muscoda, WI, Backtop pull, rules and classes.
|
WTF
|
AsIread thelast post I say somonehelp this guyout abit! I for say who cares run the big tire on blacktop isn't going to help prob will hurt the lighter class. I pull a heavier farm tractor and we throw the 18.4 38 back on instead of the 20.8 to get more ground pressure on the tire butwhatdoIknow! |
Re: Muscoda, WI, Backtop pull, rules and classes.
|
Anonymous User
|
18.4 28s-18;4 38s tires is as big as they go run the tires u want as long as no bigger than 18.4s nothing bigger than 38" |
Re: Muscoda, WI, Backtop pull, rules and classes.
|
Anonymous User
|
Is there any other rules for the 7500 and 8500 na farm class |
Re: Muscoda, WI, Backtop pull, rules and classes.
|
Anonymous User
|
na classes 18.4 tires ;no big cube;2750RPMS must be farm stock appearing; rules are about the same at most blacktop pulls ;to the ants.wasn;t at reeds town what was agreed on there is news to me; sorry ; we may be able to make a class for small tires; or just big tires depends on what shows up; thanks bob |
Re: Muscoda, WI, Backtop pull, rules and classes
|
Mueller
|
Steel wheels allowed in 8,500/9,500 NA? Thanks Brian Mueller |
Re: Muscoda, WI, Backtop pull, rules and classes
|
Anonymous User
|
yeah Brian, if you want to bring steel you can, as long as you bring lots of money to pay me off with, just kidding, |
Re: Muscoda, WI, Backtop pull, rules and classes
|
Anonymous User
|
what mph are you running in antique. pace or board |
Re: Muscoda, WI, Backtop pull, rules and classes
|
Anonymous User
|
thinking 3 mph pace and all the sand bagging they want. |
Re: Muscoda, WI, Backtop pull, rules and classes.
|
pullin fool
|
what do you call big cube? masseys and minnies come with big cube. are these guys going to get to pull? |
Re: Muscoda, WI, Backtop pull, rules and classes.
|
Anonymous User
|
all are welcome mm;s massey; ih; jds ;case ; na 18.4 tires ;2750 rpm must look like a stock farm, tractor ;bring them we will pull them IF they are like the above rules . |
Re: Muscoda, WI, Backtop pull, rules and classes.
|
Why have a speed limit in the antique class when you allow "all the sand bagging you want" I don't agree with that. You should not allow the sand bagging. I thought the whole reason for a speed limit is to keep everyone in check. If you allow sand bagging then why even have a speed limit?? If you make everyone run 3mph than it is a more even playing field. This is just my two cents. |
Re: Muscoda, WI, Backtop pull, rules and classes.
|
ANTIQUE NUT
|
Deer Shelbee eye tink you have sum gud eyedeas but youlack sum branes seayou toomoroe!! |
Re: Muscoda, WI, Backtop pull, rules and classes.
|
Registered: 02/09/2010 Posts: 237 |
You still never said what age is considered antique? Or if a 15.5x38 is allowed? I wouldn't mind trying my 460 on blacktop just once. |
Re: Muscoda, WI, Backtop pull, rules and classes.
|
harvester-of-sorrow
|
well, i would imagine if 18.4's are allowed 15.5's would be fine, maybe you should read before posting. |
Re: Muscoda, WI, Backtop pull, rules and classes.
|
Anonymous User
|
I like three mph it gives every one a chance in the antiquethe guys running the bigger tires go for it with 18/4 i might have chance with the wd |
Re: Muscoda, WI, Backtop pull, rules and classes.
|
harvester-of-sorrow
|
this is all a bunch of crap< why arent you going with 16.9x28 0r 15.5x38 which is what we all from the area agreed on, why cant all the area pulls be the same? now i half tohave 3 different size tires and only live 20 miles away from all of the local pulls? like it or not people do enjoY antiques, so quit treating us like a bunch that no one wants to see |
Re: Muscoda, WI, Backtop pull, rules and classes.
|
in my opinion, 18.4x38 is just fine. the width of the rim that some of the 16.9x28's are on make the tire WIDER then most of the 18.4x38's I've seen when I was at ithaca. my little 14.9s didn't stand a chance on blacktop. when its on dirt, its a whole nother ball game and 14.9 or 15.5 x38 vs the 16.9x28 is more fair. if you really wanna complain about tire sizes, then there should also be a rim width limit also.
I remember when pulling used to be fun... |
Re: Muscoda, WI, Backtop pull, rules and classes.
|
If it is STOCK ANTIQUE why the 18.4's? What stock antique tractor came with 18.4's? |
Re: Muscoda, WI, Backtop pull, rules and classes.
|
Anonymous User
|
hey, i don't mind watching antiques ether, but the tires size is what some of the guys want, we are alowing sandbaging it alows for drivers to manipulate their pace which means that they have to time their speed right, making it more of a drivers sport, that way tires don't matter, with all tractors at the same pace all the time, makes the bigger tires have the advantage, with sandbaging, as long as they don't pass the pace tractor of course, it doesn't matter if the tractor as bigger tires, if the driver messes up on timing, they'll still lose to the guy with smaller tires who timed it right. At three miles an hour, it's still safe.
it makes things more intrusting to watch. all the really stock farm classes are being pulled saturday by the dairyland antique group, so we wanted to something different then the day be for. Shelby Page |
Re: Muscoda, WI, Backtop pull, rules and classes.
|
AGREE
|
It is a known fact in our area that Roger aka avocasmokeywdallis has and still does need hooked on phonix!!!! Just my two cents have a great pull JAWS JR!!! |
Re: Muscoda, WI, Backtop pull, rules and classes.
|
Anonymous User
|
im not the only thats perfect at spelling is avoca wi having a pull july tom mchintosh waunts justin to call him i know it didnt go perfect last year the american legion for the insurance we need to know soon |
Re: Muscoda, WI, Backtop pull, rules and classes.
|
Registered: 01/19/2010 Posts: 136 |
Roger tell Tom to call me I haven't heard from the sled guy yet. 608 475-0661 |
Re: Muscoda, WI, Backtop pull, rules and classes.
|
Anonymous User
|
what classe are being pulled saturday night? where can i find that info? Edited 1 time(s). Last edit at 04/21/2010 03:47AM by hsd. |
Re: Muscoda, WI, Backtop pull, rules and classes.
|
Anonymous User
|
no classes sat .nite some ant. club sat aft. noon ;we moved to sunday . also NO tube frames or homemade style no 706;s with big motors or 3010s with 466s get the idea; big cube CLASS MEANS 966 NA WITH STOCK APPEARING BLOCK ;4020 WITH STOCK JD BLOCK . ANDS SO ON ;MMS ; CASE ;MASSEYS ARE THE SAME this class runs at 2750 rpms; thank you for the comments now it is all cleared up; |
Re: Muscoda, WI, Backtop pull, rules and classes.
|
what antique club will be there saturday, or a phone number for contact maybe? |
Re: Muscoda, WI, Backtop pull, rules and classes.
|
disregard previous post, didn't realize it was mentioned when I skimmed through earlier... |
Re: Muscoda, WI, Backtop pull, rules and classes.
|
Anonymous User
|
Community antique pullers the pull is noon sharp here are the classes57 and older antiqueclasses are 3500 3800 4300 4600 5000 6000 and 6500 farm classes 4000 4500 5000 5500 6000 6500 7000 7500 57 and older must all have factory stock antique classes must run wheely bars you can run tires backward but not sunday Ed cook knows who to get in contact with his number is 608 882 0449 im pulling sat and sunday the tire limit is14/9 i think they can run 16/9 on up in the heavy farm classes must run low gear johndeere with granny gear can pull in second you can pull 2nd gear in the antique they do have horn on the the class must be all stock you can run steelpress rims i think 6500 and up can run 18/4 in the farm there is a 3010 runs in the farm class Edited 1 time(s). Last edit at 04/30/2010 08:45AM by avocasmokeywdalliss. |
Re: Muscoda, WI, Backtop pull, rules and classes.
|
Anonymous User
|
can you have track bring the radar board i now the yhad at ithica in 2008 |
Re: Muscoda, WI, Backtop pull, rules and classes.
|
jdd
|
im a kinky bastard |
Re: Muscoda, WI, Backtop pull, rules and classes.
|
jg
|
808-7943 for a good time!!!! |
Re: Muscoda, WI, Backtop pull, rules and classes.
|
Anonymous User
|
how much a hook, what defines improved farm, trophies or money |
Re: Muscoda, WI, Backtop pull, rules and classes.
|
km
|
ok im kinda new to this so are you guys sayin that u guys pull on dirt tracks of pavement??? Thanks |
Re: Muscoda, WI, Backtop pull, rules and classes.
|
can i run steel centers?how bout running tires backwards? |
Re: Muscoda, WI, Backtop pull, rules and classes.
|
Anonymous User
|
Improved farm is too hot to farm with a changed name and 2.6 charger, stock core pump, 466 cubic inch, 540 for V-8. yes we are pulling on the street, something that was done years ago that we are bringing back. It's a cheaper way to have a pull, and is a good type of pulling for kids and first timers to learn to be a good driver. you can run steel centers in the open classes and improved, no backwards tires though.
the pull starts Sunday at 10AM sharp, sign in starts at 9AM, the classes posted are the class order for the pull, we are NOT going to wait for people to show. make sure your there for your class. parking will be in the highschool and district office parking lots. anymore question call 608 739-4089, Thank you, Shelby Page. |
Website Statistics
Global: Topics: 38,779, Posts: 229,954, Members: 3,338.
This forum: Topics: 37,098, Posts: 226,037.
Global: Topics: 38,779, Posts: 229,954, Members: 3,338.
This forum: Topics: 37,098, Posts: 226,037.
Our newest member Jacklovik2009