04:20:25am, Sunday, May 19, 2024
quad range in a hot farm deere
|
some one new
|
will a quad range trans. hold up to a hot farm type class? |
Re: quad range in a hot farm deere
|
Anonymous User
|
yes it will work up to about 900 to 1000 hp |
Re: quad range in a hot farm deere
|
What gives up in one at 900-1000hp? |
Re: quad range in a hot farm deere what breaks?
|
some one new
|
HEY chris,,, what breaks down if you are over that 900 to 1000hp? |
Re: quad range in a hot farm deere what breaks?
|
Anonymous User
|
you will be pretty close to all you can put through both the clutch and quad but clutch mainly and take the chance of breaking the short shaft between the quad and top shaft of the transmision when u get to that much power you probly need custom gears and a crower because that wet setup takes horsepower to turn |
Re: quad range in a hot farm deere what breaks?
|
want to change
|
How much hp is lost through the wet clutch setup? Would like to change my 4440 to dry but how do u do it? Am confused and need some help. |
Re: quad range in a hot farm deere what breaks?
|
We pull in the 3000 rpm clas with a quad range and we have ripped out the 2 speed already once and smoked the clutches in the second time in the 2 speed. We broke the shaft that goes all the way through. The houseing from the 2 speed was also broke. This was all using a 3lm charger
also. You can beef up everything a little witch we have but they wont stand Hot farm for very long if you are doing any winning at all. |
Re: quad range in a hot farm deere what breaks?
|
4430
|
WHAT YOU HAVE TO DO IS GET A 4020 OR 4010 BELL HOUSING AND TRANSMISSION TO GET AWAY FROM THE WET CLUTCH AND 2 SPEED. WE HAVE HAD THE SAME PROBLEMS, THE ONLY BAD THING WITH THIS IS THAT YOU LOOSE THE 2 SPEED BUT YOU GAIN ON THE BREAKAGE
GOOD LUCK |
Re: quad range in a hot farm deere what breaks?
|
need to know
|
Do you have to go with a 4020 tranny or will the stock tranny work |
Re: quad range in a hot farm deere what breaks?
|
4430
|
YOU WILL HAVE TO GO WITH THE 4020 TRANNY |
Re: quad range in a hot farm deere what breaks?
|
Never had any problems with the 4430 two speed or the engine clutch, but have 6 disks on the engine clutch, and the extra disks like in an early 4430 in the 2 speed. I do know that The D3-4 gear set seems to be a weak link. I know of a guy that has taken the teeth off the high pinion twice pulling D3-4 in the 10000lb 3000rpm hot farm classes. |
Re: quad range in a hot farm deere what breaks?
|
Anonymous User
|
I have never had my 2 speed slip or break ever but i am very easy off the clutch and dont ram rod it off the line & am running around 900 hp 5000 rpm dont worry about your 2 speed run it until you can afford the 7000 dollars to put the crower and custom gears in to make it fast enough to compete |
Re: quad range in a hot farm deere what breaks?
|
At 5000rpm that quadrange should be doing 42mph wheel speed in d4. I would think that would be plenty competitive! Why only 900hp if you can spin it 5000rpms though?? |
Re: quad range in a hot farm deere what breaks?
|
Anonymous User
|
900 hp?? |
Website Statistics
Global: Topics: 38,779, Posts: 229,957, Members: 3,338.
This forum: Topics: 37,098, Posts: 226,040.
Global: Topics: 38,779, Posts: 229,957, Members: 3,338.
This forum: Topics: 37,098, Posts: 226,040.
Our newest member Jacklovik2009