407 rods in a 466 October 09, 2010 04:59AM
Has anyone out there put a 407 rod in the 466 cid engine??

Re: 407 rods in a 466 October 09, 2010 02:29PM
they will work you will need diffrent comp height pistons

Re: 407 rods in a 466 October 10, 2010 12:43AM
Will the rods make more power in the smaller 466 like they will in a 570 or 600? Is there anyone out there that has done this???

Re: 407 rods in a 466 October 10, 2010 01:31AM
most times

Re: 407 rods in a 466 October 10, 2010 02:03AM
How much better are we talking?? 15 hp or 60 hp??

Re: 407 rods in a 466 October 10, 2010 02:29AM
zero hp the factory rod stroke ratio is a 1.59 in a 466 with a 407 rod it is 1.63 rod stroke ratio is made out to be more important than it is. if you have a cube limit figure out how much bore and stroke it takes to get it then move the pin up as much as you can without oil ring issues. the result is the rod length that you need. if your staying 466 leave a 466 rod in it

Re: 407 rods in a 466 October 10, 2010 03:22AM
in the search box here type in

407 rods
or

407 rod

see all the talk on this

Re: 407 rods in a 466 October 10, 2010 05:22AM
has anyone out there ever tryed the 407 rod in a 466.... it should free the motor up and make more hp and tourque???? maybe iam wrong?

Re: 407 rods in a 466 October 10, 2010 11:02AM
[www.pulloff.com]
407 rod post

Re: 407 rods in a 466 October 10, 2010 11:24AM
has there been anyone that i can talk to that has tried this??? would like to know what was used for pistons and how it worked???

Author:

Your Email:


Subject:


Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message:
Website Statistics
Global: Topics: 38,777, Posts: 229,949, Members: 3,338.
This forum: Topics: 37,098, Posts: 226,034.

Our newest member Jacklovik2009