John Deere 404 April 11, 2011 02:24AM
I was wondering if anyone knew if any 404 will bolt up to a 4010, i know the old ones will but was curious if the later 404 would bolt up as well. If the later 404 will not bolt up to this transmission does anyone have any sugestions on putting a P pump on the early motor. Thanks for any suggestions.
Reply Quote

Re: John Deere 404 April 11, 2011 02:39AM
it will bolt up
Reply Quote

Re: John Deere 404 April 11, 2011 11:13AM
hell you can bolt a 466 up just need built clutch setup
Reply Quote

Re: John Deere 404 April 12, 2011 02:03PM
If your not pulling in a reg. Farm stock class. For the money and power a 466 will bolt right up and is a much better motor. In fact if you tried to buy a 404 from your local johndeere dealer the 466 is a factory replacement motor.
Reply Quote

Re: John Deere 404 - P pump on early 404 April 13, 2011 01:11AM
Thanks for the help on this my next question would be if i dont run across a later 404 how much trouble will i have getting a line pump set up on an early block.
Reply Quote

Re: John Deere 404 - P pump on early 404 April 13, 2011 01:46AM
I have a 404 out of 7700 Combine that we used in my dads 3000 rpm tractor
Runs great, Have intake and exhaust manifolds plus choice of A pumps to go with it
Call Me if interested
402-910-6949


Mike Langan
402-910-6949
Reply Quote

Re: John Deere 404 - P pump on early 404 April 15, 2011 01:21AM
I have a 404 engine out of my 4320 that we pulled with it is fire ringed and good head
m_b_farms@hotmail.com
Reply Quote

Re: John Deere 404 - P pump on early 404 April 19, 2011 12:42AM
I have checked into that for years and no one has been able to answer that question. I haven't found any adapter plates and I'm not sure there is enough cast there to hold an in-line pump. I am just trying to get the most out of the rotary pump for now. A 466 is definitely the right way to go when it's in the fun to do budget. Good luck!
Reply Quote

Re: John Deere 404 flywheel April 18, 2011 07:00AM
Does anyone know if a 404 flywheel will bolt onto a 359? I am actually going to run in a 359 class, i have a clutch set up for a 404 thats whay i was thinking of getting a 404 and de-cubing however if the clutch will work i would just build an adapter plate and put in a 359.

Thanks David
Reply Quote

Re: John Deere 404 flywheel June 18, 2011 09:41AM
David -

I have a 404 flywheel with the adaptor plates to bolt on to a 359 - brand new, never used. If interested please call me at 319-721-3932.

Cory
Reply Quote

Newer Topic Older Topic

Author:

Your Email:


Subject:
Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message:
Website Statistics
Global: Topics: 38,777, Posts: 229,949, Members: 3,338.
This forum: Topics: 37,098, Posts: 226,034.

Our newest member Jacklovik2009