Page 1 of 1 Pages: 1
Results 1 - 18 of 18
This pull is located in Calhoun ky that could be made to be on the way back thru indiana to ohio. Myer Creek Park 1050 St Rte 136 East Calhoun KY 42327
by
2255tr
-
Forum
The oliver/white planetary rear final drive bull gears are a much smaller diameter(less tooth count) than what is in a non planetary oliver/white rear end.The fastest production oliver/white planetary rear is from a G1355 or white 2-150. Send me a P.M. from here and I will try to help.
by
2255tr
-
Forum
All white 2-105's will have a 4 spider gear differential. All large frame Oliver's including 1800's will have 4 spider gears in there differentials.White Farm Equipment management in 1975 were trying to cut cost of production of a white 2-85 and chose the use of a two spider gear differential.If it failed dealers were instructed to replace the assembly with the 4 spider gear 2-105
by
2255tr
-
Forum
Be aware that the early 2-85's (1975-midyear 1977) used a four spider gear differential. Beginning with serial number 277-182 White 2-85's changed to a two spider gear differential configuration. There are also no inner bull pinion bearing supports in any white 2-85. I would not recommend using a 2-85 with a two spider geared differential for a pulling tractor.
by
2255tr
-
Forum
The owner of the case is Marty Quigley. He is from martinsville ohio area.I was told he has a Case tractor collection, but I have no contact information.
by
2255tr
-
Forum
Contact Info at Bottom
by
2255tr
-
Forum
V-8 CAT 3160/1160 were 4.5" bore 5.0" stroke 636 cid.
V-8 CAT 3150/1150 were 4.5" bore 4.5" stroke 573 cid.
V-8 CAT 3145/1145/1140 were 4.5" bore 4.1" stroke 522 cid.
These engines were only manufactured in a naturally aspirated configuration from caterpillar. They used an inline scroll metering caterpillar fuel injector pump.The '3100' series was designated for industrial use w
by
2255tr
-
Forum
If you are looking for Black Sheep announcing Duane Edwards his cell #937-409-8148
by
2255tr
-
Forum
Yes, there will be 6 classes of antique tractors for the annual F.A.R.M. show.
by
2255tr
-
Forum
Have they opened IN-3 north of the fairgrounds ? Or do you still need to use the detour to the east on base road.
Whose transfer sled will they be having?
Will it be $25 to hook with a $15 pit-pass?
T.I.A.
by
2255tr
-
Forum
The Rush County Indiana farm stock tractor pulls scheduled for Tuesday June 22 have been cancelled due to the rain.
by
2255tr
-
Forum
Massey Ferguson also has used the CATERPILLAR 3150 (573 ci) and 3160 (636 ci) v-8's in the MF1500 and MF1800 articulated 4 wheel drives .They have also used the CATERPILLAR 3208 (636 ci) v-8 in the MF1505 and MF1805 articulated 4 wheel drives.These tractors were all produced from 1971 through 1977.
by
2255tr
-
Forum
I'll use one of your own previous topic replies pullnv8 "a guy asks a simple question and somebody always has to be an a?? bout it "
by
2255tr
-
Forum
Not sure of where you are located, but if you live near the IN/OH border and north of I-70 check www.michindohpullers.org . If you are near or below I-70 check out www.dctpa.com .Also check the www.insfpa.org website for more Hot/Altered farm/Profarm rules. Most fair or brush pulls will use very similar rules to thoseclubs listed . Now if you are looking for MPH/ farm class rules, then there
by
2255tr
-
Forum
Georgetown, Ohio (Brown County Fair) Pulls September 30, October 1,2, & 3
This Pull Is Sanctioned By The Brown County Ag Society.
Wednesday September 30 7:00pm
1) 9300 Super Farm (PPL Rules)
$550,450,350,250,150,100,75,50
2) 6200 Modified 4x4
$550,425,325,200,150,100,75,50,40
3) 6200 Open 4x4
$600,450,350,250,200,150,100,75,50
4) 6500 OMTPA Modifieds
$550,450,350,250,150,100,75,
by
2255tr
-
Forum
The results of the MICHINDOH pull July 18 are posted on there web site.
www.michindohpullers.org/fortresults.htm
by
2255tr
-
Forum
I was also there and will say the $15 gate fee for the pullers was a big mistake. That $15 should have been took off the first class in which you entered so it would only cost $10 to hook then each additional class $25.The weight check and rpm check also can stand quite of improvement also.There was alot of confusion at the scales between classes.
In regard to the pull . In the 11,500lb speed
by
2255tr
-
Forum