Aluminumgastanks.net
by
Zachp
-
Forum
Rtk I have a needled 1066 differential I would let go pretty cheap.
The p3000 on a 466 with mild head work a 3x3 gt42 a good cam and the right timing should put you right in the 6-700 range. And they are right, at this hp things start to break. You will need a good clutch the bottom support in the trans and the needled diff. May also want to look at weld on hubs.
by
Zachp
-
Forum
How many cc? What size motor? Turbo? Generally a .093 line will fit the bill.
by
Zachp
-
Forum
There is a freeze plug that fits the hole from IH. I will try to look this evening for the part number.
by
Zachp
-
Forum
I have noticed locally the heavier class at 25+ mph the radials really shine.
by
Zachp
-
Forum
Wipeout has a chart on there website.
by
Zachp
-
Forum
I have a needled diff if you are interested. Seven 40-285-649 five
by
Zachp
-
Forum
Should be on the right side of the range transmission housing. About 4" below the top.
by
Zachp
-
Forum
Mine is from Mask Machine. He makes a plain handle or one that mounts to the cage.
(812) 344-2901
by
Zachp
-
Forum
Ill throw in Wipeout. Very knowledgeable and very helpful. Dave and Josh are great to work with.
by
Zachp
-
Forum
Map ring in the compressor housing.
by
Zachp
-
Forum
$1200 I believe. Works very well. Went from manual stock brakes to these and it steers much easier with the brakes. No pumping the brakes to make sure they are there. Has about an inch of pedal movement and it's good brake. Highly recommend going to disc.
by
Zachp
-
Forum
Bought the caliper brackets from atlas, rotors from wipeout and the calipers and masters and lines from jegs. Works very well after you get it bled. Bleeding is a bloody nightmare!
by
Zachp
-
Forum
Call Dave at Wipeout.
by
Zachp
-
Forum
Only concern I would have there is pushing hot fuel back to the motor.
by
Zachp
-
Forum
Return it to the bottom of the tank.
by
Zachp
-
Forum
You will kill a TA first time out and be stuck. You will need more gear, something over direct with that hp and cubic inches.
by
Zachp
-
Forum
Throw it over the hill and put a straight shaft in.
What kind of horsepower? Tires cut or not? What class?
by
Zachp
-
Forum
I will vote for mask machine. Mike is a great guy and builds very nice stuff.
by
Zachp
-
Forum
Ours did the same thing with a 98 housing. Precision charger. Put a map ring in the turbo and solved a lot of issues.
by
Zachp
-
Forum
Call Isspro and pick up a diesel tach with a magnetic pickup. Just put a magnet on the balancer and mount the pick up to a bracket. Very simple install.
by
Zachp
-
Forum
So no big tractor stuff? 9500 turbo pro farm?
by
Zachp
-
Forum
Are you using a roll cage or just roll bar? I bought a hydraulic cable with yokes on each end from the handle all the way to the pump. If you want a nice handle get with Mike at Mask Machine. (812) 344-2901 He makes just a straight handle and is working on a clamp on roll cage deal.
by
Zachp
-
Forum
I second the buggy shop. Nice aluminum tanks.
by
Zachp
-
Forum
2 EGT probes. I believe they are working on an expandable box to add more.
by
Zachp
-
Forum
Using 50wt vr-1 valvoline in our pro farm. Bearings looked almost new after last season
by
Zachp
-
Forum
Call Isspro. I have a performax system and it works great. Start out with basics and add as you want.
by
Zachp
-
Forum
Normally he is on time or up to a couple weeks behind. Nothing like another big big name I have dealt with this year. 4 months behind.
by
Zachp
-
Forum
Jim is a good guy. Went through my pump last year and built a new set of injectors. Have had good luck with them.
by
Zachp
-
Forum
Call Isspro.
by
Zachp
-
Forum