Page 2 of 3
Pages: 123
Results 31 - 60 of 83
Low vis trans hydraulic oil is what I run
by
970 case lss
-
Forum
What ratio are the 800 high range? They need to be an overdrive to give you anything useable
by
970 case lss
-
Forum
Do you pull road gear in your 1175? Consider your gearing changes with switching to the 970 rear. You can use the 1175 high range in for the 970 low to get some good ratios
by
970 case lss
-
Forum
I weighed 1175 planetaries at one time and seem to remember them being 550 lbs a side
by
970 case lss
-
Forum
I just bought a regular dry van to convert to a hauler. It's only 6" higher than a step van on 22.5 rubber. I built 11' aluminum ramps and this winter will be installing a side door and living quarters. The thing that pushed me to a dry van is you can get a nice one for the price of a beat up step van
by
970 case lss
-
Forum
I run a power steering gear pump on a 504 case, I run 75 to 80 lbs fuel pressure to an 800 cc p pump. Flows around 4-5 gal/min, returns plenty for cooling through the pump
by
970 case lss
-
Forum
I run a type 54 from frozen boost, the biggest one they make and modified with two 1 " inlet and outlets. I can melt 60-70 lbs of ice pretty easily
by
970 case lss
-
Forum
Melting 60 or so lbs of ice depending on the day and I would use about 1 1/2 quarts of water the egts were a pretty consistent 1400-1500 degrees at pre turbo
by
970 case lss
-
Forum
Sorry need to update my name, it's on a 9500 lb case pro/super farm
by
970 case lss
-
Forum
Its not a pain once at a pull, it's sometimes difficult to find enough ice at times and in smaller centres. Was just curious as to folks thoughts on power loss without the cooler. Thanks again
by
970 case lss
-
Forum
What's folks opinion of ice Intercooler vs water Inj only, ran my first year with the cooler but the ice part is a real pain, thanks in advance
by
970 case lss
-
Forum
I had some done by DLH Machine in Hagerstown MD 1 301 739 1183
Dave was fantastic to deal with and great turn around time.
He only did the treating, had my local machine shop re size them.
by
970 case lss
-
Forum
It ran very well, I was quite happy to be within a few feet of it with a brand new tractor
by
970 case lss
-
Forum
Pulled against the old remedy tractor this past weekend. Anyone that could enlighten me on it? Trying to see how my newly built tractor stacks up. Thanks
by
970 case lss
-
Forum
Approx how much more power will a fairly current precision 3x3 make over a gt 42 3x3 box turbo?
by
970 case lss
-
Forum
Perfect, thank you all for the help!! And thanks Morgan's for a great site!!
by
970 case lss
-
Forum
Ok that's more than I would have thought with a cooler, im putting it in the intake tube from cooler to engine, using enderle nozzles, what's the min amount of nozzles I can use?
by
970 case lss
-
Forum
Just finished a 504 case, 700cc p pump, gt 42 turbo, Intercooler, open rpm. What's a good starting amount of water? Thanks
by
970 case lss
-
Forum
I have bought a ton of parts from people on pulloff, never had a moments trouble yet. Couldn't have built my tractor without all the help from people I've never met. Thanks Morgan's for a great job done!!
by
970 case lss
-
Forum
What oil do folks find works best in a super farm motor?
by
970 case lss
-
Forum
How much power were they making back then?
by
970 case lss
-
Forum
I know the scammers are a pain but don't let them ruin it for everyone. I have bought tons of parts used on pulloff from all over the US, paid always with a bank draft and got folks to ship to me. Honest folks relying on honest folks
by
970 case lss
-
Forum
I run a cast aluminum gate, works perfect.
by
970 case lss
-
Forum
There are different ways to go about it, what are guys commonly doing? Thanks for input
by
970 case lss
-
Forum
Putting atomized water through the cooler defeats the purpose does it not?
I would think the cooling effect would re collect the water back into larger drops?
by
970 case lss
-
Forum
Looking for opinions on best placement of water nozzles on 504 ci with a cooler, 750cc, 3x3, open rpm
Thanks in advance
by
970 case lss
-
Forum
I'm going to run brad penn 30wt
by
970 case lss
-
Forum
Thank you for the info
by
970 case lss
-
Forum
How much oil? 1 qt?
by
970 case lss
-
Forum
So if I removed my bearing plate, welded shut the holes and re installed it, end play should be the same. I've already installed fill and drains
by
970 case lss
-
Forum
Page 2 of 3
Pages: 123