03:04:26pm, Sunday, May 05, 2024
IH hydraulics on an open rpm tractor
|
Registered: 04/12/2008 Posts: 398 |
If a guy was to convert from a 3000 rmp tractor to open rpms, how long could he expect a factory hydraulic pump to work? The tractor I have the concerns with is a factory no TA, but I do want to retain my power steering, and factory brake setup. Is it possible, or will I grenade my pump behind the mcv at the line? |
Re: IH hydraulics on an open rpm tractor
|
Registered: 10/26/2010 Posts: 101 |
Did it for a couple Years and didnt have a problem with it! If i was you i wouldnt pay any attention to some posts that dont say who they are, |
Re: IH hydraulics on an open rpm tractor
|
rick 66
|
how hard are you going to turn it? |
Re: IH hydraulics on an open rpm tractor
|
Registered: 04/12/2008 Posts: 398 |
466 hot farm. Open rpm. My pump and turbo combination have no affect on the hydraulics, just wondering if the rpms will take the pump out. My chassis is a factory no TA 1566, so putting brakes on it is really a challenge. I would have to make top hats the size of 50 gallon drums to get over top of my planetaries! |
Re: IH hydraulics on an open rpm tractor
|
My friend is running a 1206 with 466 turning over 5000 rpm off line with no problem. Good luck and have fun. |
Re: IH hydraulics on an open rpm tractor
|
Anonymous User
|
I ran a 525 with a 3.15 X 3.6 around 5300rpms off line and no problems. I would recommend deleting the TA and going to a straight shaft. Good luck! |
Re: IH hydraulics on an open rpm tractor
|
It won't be an issue,bill miller still had hydraulic brakes and power steering on the red mule up til he quit pulling it a cpl years ago and we have never had an issue with ours either |
Re: IH hydraulics on an open rpm tractor
|
Registered: 04/12/2008 Posts: 398 |
Thanks for the support guys! Like I said, all I need it to do is run the brakes and steering! |
Website Statistics
Global: Topics: 38,699, Posts: 229,799, Members: 3,329.
This forum: Topics: 37,081, Posts: 225,951.
Global: Topics: 38,699, Posts: 229,799, Members: 3,329.
This forum: Topics: 37,081, Posts: 225,951.
Our newest member CBeard