10:32:23pm, Tuesday, May 14, 2024
JD 4010 gas
|
Registered: 04/15/2008 Posts: 73 |
need around 150hp. N.A. NO TURBO CAN ANYONE SUGGEST HOW TO DO THIS |
Re: JD 4010 gas
|
Registered: 03/28/2008 Posts: 296 |
yup your compresion for starters. get a better ign. like a msd. and what are you allowed to run for fuel? |
Re: JD 4010 gas
|
Registered: 04/15/2008 Posts: 73 |
stay with gas or change gas block to deisel |
Re: JD 4010 gas
|
Punisher
|
GAS!! Gas will always make more hp than diesel in a NA motor. |
Re: JD 4010 gas
|
Registered: 04/15/2008 Posts: 73 |
please tell me more how do i get there, i was told that 4 main gas motor wont hold up to tractor pulling |
Re: JD 4010 gas
|
Punisher
|
Bore it out but not real big, you still want it to turn some RPM's. Get some good pistons. Change the rockers, flow the head, do you have to run an updraft carb? If so find a big one off an airplane. Gray Billet Products or Genes Machine are good places to get some of these parts. |
Re: JD 4010 gas
|
Registered: 04/15/2008 Posts: 73 |
phone no. please |
Re: JD 4010 gas
|
_Brad
|
I think we have already talked. I have an LP manifold that may help as well.
Thanks, Brad Gray 412-585-3913 |
Re: JD 4010 gas
|
4020 deere
|
give me a call i have one making 200 hp motor could be for sale if intrested greg 816-390-1893 |
Re: JD 4010 gas
|
AC farmer
|
I new a guy who had a dino like that. |
Re: JD 4010 gas
|
Registered: 03/28/2008 Posts: 296 |
if you wanna run gas but cant run alky run e85 best of both world. |
Re: JD 4010 gas
|
Registered: 04/15/2008 Posts: 73 |
ok how do i get hp. somewhere around 150 200hp. would be nice |
Re: JD 4010 gas
|
Registered: 03/28/2008 Posts: 296 |
bore out to get big cubes. 200 to 300lbs of compression per cyl. and get urself a msd ignition box and coil. run ur limit for rpms the more the better. |
Re: JD 4010 gas
|
Registered: 04/15/2008 Posts: 73 |
who does this |
Re: JD 4010 gas
|
Registered: 03/28/2008 Posts: 296 |
well where ya from? and just about any engine shop can do it. |
Re: JD 4010 gas
|
Registered: 04/15/2008 Posts: 73 |
yes, but is still only 364 367 .......somewere in there, I thaut through this sight there would of bin someone how wood of said something like a 404 block 466 pistons shave top off add cam out of/???? rods out of??? and still use gas head. takeing the gas motor and adding more air doesnt make power, I thaut bore and stroke maid power. as for the machine shop gos I would think that place would know what would work.But I know the secret is kept a secret. you see the red ones cheat a little and the blue ones but what about the green ones. |
Re: JD 4010 gas
|
um?
|
air and fuel make power! |
Re: JD 4010 gas
|
Registered: 04/15/2008 Posts: 73 |
i tryed that last year in a different tractor and spent all kind of money and it wasent any better |
Re: JD 4010 gas
|
Fritz
|
Sorry know one else helped you out.Give me a call some evening and we can chat. Fritz 563-744-3814 Ia. |
Re: JD 4010 gas
|
Registered: 03/28/2008 Posts: 296 |
up here they cheat the most! |
Re: JD 4010 gas
|
Registered: 04/15/2008 Posts: 73 |
where is that. |
Re: JD 4010 gas
|
Farmall M
|
where is up here redpuller460? where you from? |
Re: JD 4010 gas
|
Registered: 04/15/2008 Posts: 73 |
Iam at the state line today. were are you at... |
Re: JD 4010 gas
|
Registered: 07/11/2008 Posts: 326 |
What will they let you run for a block? If it has to look close to stock, you can use the 4020 style 404 Diesel block, and mix & match parts.. no idea on the pistons.. should be able to machine the diesel pistons.. custom pistons would be better.. You could always go to a new/bigger JD block.. just have to run you dist off the timing gears where the injection pump was... and find a CNG head... (or a CNG engine..)
JDGnut |
Re: JD 4010 gas
|
Ken
|
I have a natural gas JD 55 series head available!
fullpull@acegroup.cc |
Re: JD 4010 gas
|
Registered: 04/15/2008 Posts: 73 |
what is a cng |
Re: JD 4010 gas
|
cng
|
compressed natural gas |
Website Statistics
Global: Topics: 38,757, Posts: 229,914, Members: 3,336.
This forum: Topics: 37,092, Posts: 226,013.
Global: Topics: 38,757, Posts: 229,914, Members: 3,336.
This forum: Topics: 37,092, Posts: 226,013.
Our newest member DANNY.WAINSCOTT@YAHOO.COM