10:01:23am, Sunday, May 19, 2024
Boch A Pump on 4320 block?
|
looking for answers
|
Can anyone tell me for certain whether a Bosch or Nippendenso A Pump will bolt up to a stock 4320 block without doing any machine work? |
Re: Boch A Pump on 4320 block?
|
Anonymous User
|
it will not bolt on. |
Re: Boch A Pump on 4320 block?
|
looking for answers
|
OK, so it's not a straight up bolt on. I guess the next question is, Is it possible to mount one on it, and if so what work would need to be done? |
Re: Boch A Pump on 4320 block?
|
4320 guy
|
What do you have to do to get one to fit? |
Re: Boch A Pump on 4320 block?
|
Anonymous User
|
The block is not made to support the heavier pump plus rotary is cam shaft driven. |
Re: Boch A Pump on 4320 block?
|
jd43
|
You need a 404 combine or 4430 style block etc. or go with a 466. I've been in same situation for along time. Good luck! |
Re: Boch A Pump on 4320 block?
|
Registered: 07/11/2008 Posts: 326 |
The pump is on the front on a 4320.. Not sure if there is enough to machine it out for an A pump mount.. I've seen adapters made to run A pumps on other engines.
I'm guessing you have to run a stock block?? |
Re: Boch A Pump on 4320 block?
|
jd ss puller
|
It can be done we used to have a setup but its long gone you can machine the hole out and make a spacer between the pump and cover the pump has to set with the lines coming out at 2:00 position and support the pump bottom to the engine block they did this in the 70s - 80s so its not uncommon |
Website Statistics
Global: Topics: 38,779, Posts: 229,957, Members: 3,338.
This forum: Topics: 37,098, Posts: 226,040.
Global: Topics: 38,779, Posts: 229,957, Members: 3,338.
This forum: Topics: 37,098, Posts: 226,040.
Our newest member Jacklovik2009