09:13:07pm, Friday, May 03, 2024
Girdle cost
|
Guestimate
|
Considering putting together a DT466 for a 3500RPM open 3" turbo class. Seems to be in the territory of needing a girdle according to what I am told.
Anyone give me an idea on cost of a girdle with machine work and all? I have an idea on everything else. Thanks. |
Re: Girdle cost
|
Pull Fan
|
Wipe Out Enterprises has a full price sheet you can download on their website. That should give you an idea. |
Re: Girdle cost
|
Registered: 08/03/2008 Posts: 437 |
Kenny’s pulling parts shows one for $950. |
Re: Girdle cost
|
Registered: 08/26/2019 Posts: 26 |
There's allot of time and machine work to properly fit the girdle |
Re: Girdle cost
|
Registered: 08/06/2018 Posts: 34 |
Our shop is the following...
Steel Girdle with Spacers - 1200 Main Stud Kit - 850 Block Prep for Girdle Install - Machining - 375 CNC Line Bore - 575 Cleaning Extra VG Motorsports Eddyville Iowa 6417994452 |
Re: Girdle cost
|
Guestimate
|
Good info, thank you! |
Re: Girdle cost
|
xxx
|
without billet caps made to length, spacers are not recommended, and line bored with the "RIGHT" studs, it is a waste of money. |
Re: Girdle cost
|
To xxx
|
Absolutely nothing wrong with using spacers. Billet caps aren’t necessary at the level he’s talking. However I agree if not done “RIGHT” it is a waste of money |
Re: Girdle cost
|
plum krazy
|
WHY DO IT HALF A**, WASTE MONEY ON A LAME JOB. |
Re: Girdle cost
|
To plum crazy
|
Why type in all caps? I don’t think you understand the difference between buying stuff you don’t need and performing a process correctly |
Re: Girdle cost
|
Just Saying
|
Also Plum Crazy, maybe the guy is on a tight budget and cannot afford billet caps. Not everyone can afford the best of the best. |
Re: Girdle cost
|
Joey
|
spacers need to be done right and with that said all the proper machining would be near to what billets caps with no gaps would be. |
Re: Girdle cost
|
987654
|
that's like putting in studs, but oh wait, cant' afford all of them so which ones do I not buy, half or just one?? people are funny, do it right or stay on the porch. |
Re: Girdle cost
|
Registered: 08/06/2018 Posts: 34 |
All the proper machining for spacers is 375. That includes surfacing pan rails, surfacing main saddles, surfacing both sides of the main caps and surfacing the spacer to set girdle height. When we are done with a job all caps and spacers are the exact same thickness. Billet Caps are 1800 and still require the 375 to prep to your block and set girdle height. When done proper for the environment used there is ZERO issues using spacers. Prostocks before recast blocks used spacers. |
Re: Girdle cost
|
Justinn
|
mine cost about 2200 for an antique, with 4 mains, the old cast were worn,loose and had been moving, had little choice,line bore is a great idea, |
Website Statistics
Global: Topics: 38,686, Posts: 229,788, Members: 3,328.
This forum: Topics: 37,080, Posts: 225,952.
Global: Topics: 38,686, Posts: 229,788, Members: 3,328.
This forum: Topics: 37,080, Posts: 225,952.
Our newest member Jason