In most cases people cant save for this. It's like a house the price seems to be going up every year. Then you say well a house goes up in value. Buying the right tractor can do the same. Now i'm talking about your average Antique to hot farm not Grand national Tractors. I guarantee you can walk out and set on your tractor any day, try that with you stock investments! Oh wait you cant c
by
floyd isbell
-
Forum
List your pulls on both sites. As the pull gets closer it comes to the top of page. We all want to be able to find localtractorpulls.
pull listings for all pullers and spectators. http:localtractorpulls.com
by
floyd isbell
-
Forum
$20 per hook. The first class will be 4000lbs. sign ins will start at around 430. be a little early if possible so we can arrange classes and order plus have drivers meeting before 6 pm. thanks to everyone for coming.
by
floyd isbell
-
Forum
All open class pulling
Non turbo small cubic inch engines starting at 4000 lbs.
Big cube engines interstate class starting at 6000 lbs
Single engine modified tractors
may have alcohol turbo class depending on turn out.
Hot stock
Super farm limit to 3x4 turbo p-pump
we will try to make sure each class gets 2 hooks.
All tractors should have kill switches, wheelie b
by
floyd isbell
-
Forum
I also have back plates for this combo to. they are different. depends on the clutch you want to run and also are you running turb or non turbo. all factors in wich rear you use. any questions call 570 637-1311 Floyd Isbell
by
floyd isbell
-
Forum
On june 15,2012 friday night we are having our anual antique tractor show fri, sat, sun. Friday night this year we are having a dj playing music during the pull. Our club has recently purchased grand stands for lots of seating. There also will be food vendors and displays on the grounds. on sat we will have tractor pull 3mph,6mph and open class non turbo. FREE camping. Addmission $3 per person 12
by
floyd isbell
-
Forum
call me I will give you phone numbers for guys that have them. floyd isbell 570 637 1311
by
floyd isbell
-
Forum
hitches for? what brand and model. And don't think so.keep calling and you'll get him. I build them for farmall and internationals. 570 637 1311 floyd
by
floyd isbell
-
Forum
use a 560 diesel ring gear and machine flywhell to fit it. lots of combination will work. floyd isbell 570 637-1311 any questions call
by
floyd isbell
-
Forum
better check under valve seats. local garage just installed reman duramax engine. longblock first day started needing coolant. found cracked head. Just something to look for.
by
floyd isbell
-
Forum
I have not done a lot to the RD 501 and 450 engines. I have sold a lot of installation kits and the largest cid i heard was 780. Keep in mind the bigger you go the slower normally they turn less rpms.
by
floyd isbell
-
Forum
Go to links on top of the page and under builders you will find a lot of sources for parts.
by
floyd isbell
-
Forum
Why run alcohol when u can run VP race fuel for compression up to 16:1. No advantage other than you can mix a lot of different additives to it to make power.
by
floyd isbell
-
Forum
They will bolt in the same but crank and cam gear sets are different between the engines. 501 doesn't have sleeves and the others do.
the crank location in the blocks are different for the larger stroke.450 to 501 the bore and stroke are bigger. There is an early and late block and head. Different water pumps between them and different head gasket kits.How to tell what your getting on left
by
floyd isbell
-
Forum
Pull starts at 8:00 am registration is 6:00 or earlier. Two machines and indoor track makes for a great day of pulling.
There is lots of tough tractors. Tire limit is 18.4-38 for all classes. 3.5 mph class tires can NOT be cut at all.All open class tractor safety equipment is required. all questions call Brad at 717 927-6798 We look forward to seeing you.
by
floyd isbell
-
Forum
use 966 or 986 hydro fly wheel. then 986 clutch kit that we also sell. Ag parts.machine flywheel for ring gear and you will be lined up on the rest.
by
floyd isbell
-
Forum
My back plate cost $625 and clutches fit in without a lot of work.
by
floyd isbell
-
Forum
i do think 301 has better casting.
by
floyd isbell
-
Forum
Your side wall will only be .100" thick then you need custom head gasket. Save a lot of head aches and stay under 3.920" bore.
by
floyd isbell
-
Forum
All good advice from experience thats the best kind. Parts I sell are on my web page or you can call me at 570 637-1311
by
floyd isbell
-
Forum
Over 400 hp. Once you get there it's time for custom shaft and gears. Then needle diff.
You are correct but the fraim rails will stick out 1 inch on each side of tractor from bell housing to the front then the sheet metal will be narrower then the rails.
by
floyd isbell
-
Forum
Seems to me tractor pulling has always beeen about finding ways to make HP. I am always looking for a way to make more. I'll bet most of the parts being ran today were once cheater parts, but thats what makes tractor pulling so fun. Wondering why some one is beating you... Then going on a quest for more HP. If you want to keep it fare every one pull the same tractor....
by
floyd isbell
-
Forum
This is a few of the parts I sell to put the 466 into 560 without moving or stretching sheet metal. You will need to put in one of our aluminum / radiators also to do this. Your starter will line up in stock location. There are several ways to do this. the previous post used a spacer and I also sell those but would rather see you use backing plate then you dont need the spacer. The imformation
by
floyd isbell
-
Forum
They have got a second sled on the way for tonight trucks and will be running two sled sat. for tractors. Other than bowling greene OH. This pull has the most tractors I've ever seen at one pull.
by
floyd isbell
-
Forum
One sled may not make it due to road closings in ne pa and lower part of ny. The other sled is almost at the pull. The second machine may make it sat. provided RT17 (I86) and 81 s reopen as water receeds.
by
floyd isbell
-
Forum
---------Walnutport, PA
Posted by: JLorah Category: Pennsylvania Pulls Contact: JLorah©ptd.net 610-767-3515
When: Saturday 10 September 2011
Location: Walnutport, PA
Saturday, September 10 - Tractor Pulls
11 am Lawn Tractor Pulls
6pm Tractor Pulls
Farm Stock - 4500, 5500, 6500, 7500, 9500, 11500, 13500, 15500
Enhanced Farm - 4500, 5500, 6500, 7500, 9500, 11500, 13500, 155
by
floyd isbell
-
Forum
Water in the oil is most likely "o" rings on liners leaking.
If it's oil in the water then it's bad oil cooler.
Dont know on lifter size.
by
floyd isbell
-
Forum
about $7000 will make it run.. but if u can run rd 501, its a much better start for high hp.
by
floyd isbell
-
Forum
call any time. 570 637-1311
by
floyd isbell
-
Forum
if you need more than that 986 ppa. then its time to go double disc.
by
floyd isbell
-
Forum