Injection pump for one on ebay
by
llss puller
-
Forum
check openings of injection lines. If the fittings have been over tightened it will close up the opening a little ,check with a pin gauge or a drill bit the same as your line is supposed to be. I had this happen to me a few years ago ,split 2 barrels and this was all I found. I also later went up a size in the lines. No problem since
by
llss puller
-
Forum
I don't claim to know anything about Olivers ,Masseys or White, but I think when they came from the factory they were rigid with the cast bellypan attatched. When you take that away then it is allowed to flex where the others can't.
by
llss puller
-
Forum
1000-1450
by
llss puller
-
Forum
I agree . Paying to help put on the show has always been my biggest gripe about tractor pulling. I did notice that this past year that more pulls let the driver in free. About 7-8 verses only 1 or 2 in past. I wonder do other motorsports charge their competitors admission?
by
llss puller
-
Forum
schaffers has a good tire sealer. I used about a qt in each 30.5
by
llss puller
-
Forum
Binderlite
by
llss puller
-
Forum
I can help.
by
llss puller
-
Forum
Using the same optima deep cycle that I started with in 2006
by
llss puller
-
Forum
Phillip Bewley beat him twice this year. Charlestown and Mt Sterling
by
llss puller
-
Forum
Just because its a 474 block doesn't mean that thats what parts are in it. It could be destroked a little. or I ran a 456 crank [5" stroke] in a 474 block for a couple seasons and have a 4.6 stroke now with 468 ci. You could put up the money if you are in the class, then you would know.
by
llss puller
-
Forum
Limit in Mo. where tractor pulls now is 650 with no turbo limit that I could find.
by
llss puller
-
Forum
limit is 470 in Ky , with 1 % tolerance .
by
llss puller
-
Forum
Give me a call I can help
by
llss puller
-
Forum
I would like to build one for someone using those figures.
Not saying that this is as competive as one with all those high dollar parts you have listed, but it was built from scratch by Silver Creek Fabrication way less than 40,000. finnished 2nd in points this year.
by
llss puller
-
Forum
I'm sure Engler,or would be happy to sell a billet one, but the 4373k53 from mcmaster carr works just fine.
by
llss puller
-
Forum
mcMaster Carr has them
by
llss puller
-
Forum
Impressive little machines. I like them
by
llss puller
-
Forum
Binderlite
by
llss puller
-
Forum
I opened the oil passage way to oil galley up . other than that just usual deck resurface,check main alignment
by
llss puller
-
Forum
I turn 7.8 rods 4500-5000 rpm with stock used bolts
by
llss puller
-
Forum
Cornett Machine in Somerset Ky did mine . Works good so far. price about $2500 ,I made my own weights and they put them on.
by
llss puller
-
Forum
I got some, maybe 10 sets. kmhammons@windstream.net
by
llss puller
-
Forum
I think Total Recall llss had tube aluminum frame as does old rags lss I have aluminum channel frame
by
llss puller
-
Forum
I have bought parts from him and built and sold parts to Kevin . No problems here. Tim Hammons Silver Creek Fabrication
by
llss puller
-
Forum
corrnet machine done mine, destroked and counterweighted ,I had to supply the counter weights. No problems so far.
by
llss puller
-
Forum
tuthill 2le
by
llss puller
-
Forum