All the pump shops sell them. I made my own mount for a tuthill 6 gpm
by
llss puller
-
Forum
Build your own for the cost of a 3 phase motor. you don't even need the capacitors if you use a small motor to get it turning before you throw the power switch. I been using mine for 6 years now. I got the instructions from ebay. They had instructions for simple built ones to ones the balanced everything for even cnc machines.
by
llss puller
-
Forum
Check this out. It works for me.
by
llss puller
-
Forum
I pull in LLSS in Ky. Yes you can spend 60k + or you can spend as much or little as you want and still have a lot of fun in this class. Just because you spend 60-1000k doesn't mean your going to win any,much less all the pulls. Much more important to have everything working together in this class. I built my tractor mostly myself and had about 30,000 in it when I started . I had used aluminu
by
llss puller
-
Forum
depends on how much your tractor weighs. Some of the better tires are too heavy for many. 8 ply pullers work OK but are getting hard to find.
by
llss puller
-
Forum
Yes the 8000 and 9000 had 9 bolt axle mount duals available. I have a set on a 9000 that I use on the farm.
by
llss puller
-
Forum
Anyone got the results for Burlington LLSS
by
llss puller
-
Forum
sounds like you need more fuel and water. I run a 460 ci with a 3x3.6 hx60 and have fuel set at 850cc and 55oz water in 15sec. and run a 32 housing and spin out at end with a 19-1 gear ratio. Do you have data aquisition computer. I was at 700cc and 40cc water and added fuel and water till exhaust temp started cooling off
by
llss puller
-
Forum
I'll put my money on Sipes ,Burnett or Bewley. I think I'll go to Somerset
by
llss puller
-
Forum
kenney's pulling parts
by
llss puller
-
Forum
extreme-studs.com 317 696 7660
by
llss puller
-
Forum
LLSS pulls Saturday
by
llss puller
-
Forum
ORVTPA, Battle of Bluegrass, and KTPA has 8500 profarm open rpm's
by
llss puller
-
Forum
I can do the hats and rotors
by
llss puller
-
Forum
Whats best way to get to hwy 63 from exit 14 .
by
llss puller
-
Forum
George at Northern Sheen has a couple options
by
llss puller
-
Forum
I can build them ,Silver Creek Fabrication 859 544 2981
by
llss puller
-
Forum
Curt Forrester
by
llss puller
-
Forum
$700 send me your e mail and I will send more info and pictures kmhammons@windstream.net
by
llss puller
-
Forum
I have a hx60 for sale. Was built for super farm so its 3x3
by
llss puller
-
Forum
Contact info; kmhammons@windstream.net
by
llss puller
-
Forum
I can make one that is l shaped also
by
llss puller
-
Forum
I could get interested in building one like they pull in europe such as Brothers Toy, but I don't think the 3cyl class here in US is anything close theirs
by
llss puller
-
Forum
it has been out for a while.
by
llss puller
-
Forum
55oz 15 sec, 800cc fuel
by
llss puller
-
Forum
will the clipped wheel hc5 out perform the best hx60
by
llss puller
-
Forum
anyone tried a cut down hc5 or a hx82
by
llss puller
-
Forum
If you think thats expensive ,wait till you get to the all the other expensive parts.
by
llss puller
-
Forum