OPEN TRUCK & TRACTOR PULL & SOUTH CENTRAL WISCONSIN TRACTOR PULLERS
One Hook Only
South Central Classes
5,000 N/A Open
5,500 N/A Limited
6,250 LLST
Pro Farm
Class Grant County Classes
8,500 lbs Non Turbo; 18.4 Tires; 8MPH
9,000 lbs Modified Farm Tractor w/turbo; 18.4 Tires
11,500 lbs Too Hot to Farm Tractor 20.8 Tires, 3000 rpm
12,500 lbs Farm Stock Tractor w/turbo; 20.8 Ti
by
Mueller
-
Forum
What about a manifold such as this R96518
by
Mueller
-
Forum
I was just asked by Ken Zenz to inform everyone that the city of potosi did NOT receive much rain over night and the Grounds are in solid form. They are beginning prep work as I write this now as of 11AM.
Pull is ON and set to run as scheduled!
CONTACT KEN ZENZ (608) 642-4445
See everyone tonight
Brian Mueller 608-732-0653
by
Mueller
-
Forum
I spoke to the 4640 I referred to previously. he said he can make 10500 with it currently empty.
by
Mueller
-
Forum
I believe there is a 4640 in iowa pulling farm/too hot to farm, that is right close to 11,500.
by
Mueller
-
Forum
Would like to thank Darlington tractor pullers for a good show last night and I big thank you to the sponsors!
by
Mueller
-
Forum
Thanks Ray. Glad you enjoyed the cheese curds enough to lure you back next year. Feel free to bring your tractor back again if your feeling ambitious..
Brian Mueller
by
Mueller
-
Forum
Feel free to call me with interest for anyone wishing to pull if there isn't a class for you. We have ran Exhibitions for the guys wanting to get ready for Tomah in the past with some compensation.
Brian Mueller 608-732-0653
by
Mueller
-
Forum
Cuba City Power Pull - Diesel Truck & Tractor Pull
June 17th 2016 6:30PM SHARP (weight in at 6pm)
Tentative classes will be -
6000#/6500# N/a Hot stock, safety equipment for 6000 open RPM tractors/ 6500 tractors will run at 3000RPM, 18.4.38 tires (cuts allowed)
8500# N/a Farm, 3000 Rpm, 18.4.38 tires Non-cut, 7 mph
9000# Modified Farm, 3000 Rpm, 18.4.38 tires Non-cut, 12-15 mph To Be det
by
Mueller
-
Forum
Cuba City WI June 17th
by
Mueller
-
Forum
Robert N. Nihles, 79, of Platteville died on Friday, February 26, 2016 at Atrium Post Acute Care, Lancaster. Funeral services will be at 11:00 a.m. Wednesday, March 2, 2016 at the Melby Funeral Home & Crematory, Platteville. Deacon Bill Bussan will officiate. Burial will be at Calvary Cemetery, Platteville. Friends may call from 4:00 – 7:00 p.m. on Tuesday, March 1, 2016 at the Melby Funeral Home
by
Mueller
-
Forum
The 55 exhaust manifold has the larger turbo foot to accept the larger turbos. the oil lines can work. either buy the 55 drain line or bend the 40/50series Drain line slightly to work. you can use the same supply line.
by
Mueller
-
Forum
yes a 3lm 466 is very good upgrade on a SBJD. I switched from the factory T04 to a 3lm 33 originally(produced around 25psi boost and lowered my EGTs). was ok but not a huge difference. finally put a 55 series exhaust manifold, 3lm 466 turbo and tilted the water manifold away and it was very impressive(around 50-55 psi boost).
by
Mueller
-
Forum
here is what they are..
by
Mueller
-
Forum
I have plates machined to tilt the water manifold away from the turbo. Bolts between the water manifold and head. Only requires a extra set of gaskets. we used to machine the water manifold to 23degrees to tilt away and now began doing this . much easier and doesn't alter your original components.
message me if your interested.
Mueller 608-732-0653
by
Mueller
-
Forum
YES the Display boards were great! I personally had a few conversations that shared the approval of the Screens. Once it was mentioned that it could be a good idea to place a Screen behind the bleachers for people that wish to stretch their legs and stand(possibly grab a beer or visit a restroom). All in all it was a great addition! Job well done Gordyville Crew!
by
Mueller
-
Forum
Southwest Wisconsin Farm Tractor Pulling Rules
General Farm Tractor pulling rules
1. Rubber tires only. No chains,duals,4x4, or studs Permitted
2. All minors must be 14yr of age with written consent from guardian and have tractor driving certificate.
3. Tractor must have standard block and crankcase
4. Tractors must have original injection pump and if equipped with a blower. It must have
by
Mueller
-
Forum
Modified Farm Pulling Rules
9,000 lbs. And 3,000 RPM Max
All rules must be met for the pulling year of 2016 or will not be allowed to participate.
1. 1.3000 RPM Max. RPM pickup required with lead wire installed externally upon the frame of the tractor. Lead wire must be without breaks or connections between pick up and 3 pin connector. 3 pin connector need to be mounted on the rear of the tr
by
Mueller
-
Forum
We are going to discuss the idea of it. We had people in attendance at Southwest's meeting but we were uncertain if they had decided to allow P-Pumps or not. In my honest opinion I don't necessarily see the need for a p-pump at 8500-9000 pounds 12-15/16. Many of our too hot to farm 11500 tractors still have A-pumps or rotarys and run 15-18mph.
As to cut tires our classes all origina
by
Mueller
-
Forum
Not trying to Stir anything at all. Just saw my name mentioned and thought I would share what our area offers for a class. As of now I don't foresee any changes for 2016 but after we have a discussion I will make any planned changes public.
Brian Mueller 608-732-0653
by
Mueller
-
Forum
Chuck Steffens in Iowa does good work as well!
Chuck Steffens Facebook
by
Mueller
-
Forum
a 3lm-466 will make close to 60psi.
by
Mueller
-
Forum
Farm stock here in SW WI is 11k,13k& 15k 10-12mph.
Most like to run 20.8R38 23 radial firestones or powersaver radials wore to 20%
Also Hp is closer to 350- 400 than 200..
by
Mueller
-
Forum
is this 365 head a DOT 4 head? or would it work on a DOT 4 engine?
by
Mueller
-
Forum
Tonights pull
by
Mueller
-
Forum
I talked to Sam Kenndall (608)726-0225) last night and confirmed they added 9000# modified farm to the pull.
by
Mueller
-
Forum
Was told this morning they will adding the 9000# modified turbo farm class as well.
by
Mueller
-
Forum
Platteville Dairy Days Trator Pull
Saturday Spetember 12th Starting at 6pm sharp!
Held at Legion Field in Platteville WI
Tentative classes -
7500 no turbo 18.4x38 tires non cut speed limit 7mph
9000 modified 12-15 mph tba 3000 rpm 18.4x38 no cut tires
9500 no turbo 3000 rpm 18.4x38 non cut speed limit 7mph
11,000 farm stock turbo 3000 rpm 18.4x42 or 20.8x38 non cut speed limit 10mph
13,
by
Mueller
-
Forum
Grant County Fair Open Truck and Tractor Pull & South Central Wisconsin Tractor Pullers.
Located at fair grounds in Lancaster Wi
Starting at 6:30pm
One hook per pulling vehicle!
For further information contact Jeremy Reuter at 563-590-2616
Classes include -
South Central 5000lbs NA Open
South Central 5500lbs NA limited
South Central 6250lbs LLST
8500lbs Non Turbo farm, 18.4 non cut t
by
Mueller
-
Forum
Thanks for figuring it out. If there is any light in the future, I would be willing to lend a hand in doing something to return local pulling to the DBQ fair. As I'm sure there would be others willing to do the same. Its just too bad considering how great of a show we had there 4 or 5 years ago to not be now.
see everyone at the top of turn 1 Wednesday,
Brian
by
Mueller
-
Forum