Page 2 of 3
Pages: 123
Results 31 - 60 of 67
Thank you! Well said.
by
2255puller
-
Forum
Go to Eastern Extreme, results are in the forum section.
by
2255puller
-
Forum
I change the oil after every run just to be safe.
by
2255puller
-
Forum
Terry Foss
terrydfoss@yahoo.com
414-379-8485
by
2255puller
-
Forum
Just be careful. Even if you beef up the 3 speed it will not take allot of HP.
I used a straight shaft and a gutted housing for years.
by
2255puller
-
Forum
sent you a text
by
2255puller
-
Forum
Truck and tractor pull tonight at 7:00. Rte 74 on the Md, Pa line in Delta Pa.
Pulling gas and diesel 4x4 pickups
Pro Farm 10,500lb tractors
Semi trucks
by
2255puller
-
Forum
Can anyone give me an idea of a good front to rear weight ratio to start out with?
Class is 10,500 Hot Farm open rpm.
weighed tractor last night:
8600 total
2380 front
6220 rear
I know there is not a magic #, just looking for a basic idea.
Thanks in advance
by
2255puller
-
Forum
What are you guys using to secure your side panels on you tractors?
1/4 turn, d ring?
Pins and clips?
Thanks
by
2255puller
-
Forum
Oliver 2150
by
2255puller
-
Forum
Thank you! I will look into it.
by
2255puller
-
Forum
I thought that the Autometer used a disk with four slots or screw heads for the mag pick up to sense. I would like to position a mag pick up over the ring gear to feed a tach.
I may have to try to put a disk on the front of my balancer.
by
2255puller
-
Forum
Looking for a tach for a diesel puller. I have a spot where I can screw in a mag pick up over the ring gear. What tach and pick up would you recommend?
I will need to go at least 5K RPM.
Thanks
by
2255puller
-
Forum
Very nice! What size front tires are you running?
by
2255puller
-
Forum
Contacted SCS Gearbox, I needed a longer input shaft made for one of their two speed gear boxes that I bought second hand..
Gave them measurements on the phone, received the new shaft in 3 days. Thank you for your prompt service!
Thought that I would share a positive vendor experience!
by
2255puller
-
Forum
I am interested in the A Pump ih v8
by
2255puller
-
Forum
Call Terry Foss
TFE
414-379-8485
by
2255puller
-
Forum
Cancelled due to the rain that we've had and the rain thats on the way!
New date is June the 20th at 7:00PM.
by
2255puller
-
Forum
Please come out to the Mason Dixon Fairgrounds this Friday night for our Truck and Tractor Pull.
The fairgrounds are located on Rte 74 on the Md./Pa. line. Please visit the web site for additional information:
Richard Love Sled
The following classes will be pulling:
PRO FARM TRACTORS
-WORK STOCK GAS 4X4-WORK STOCK DIESEL 4X4 (NADM 2.5)-STREET STOCK GAS 4X4-PRO STOCK GAS 4X4-STREET DIE
by
2255puller
-
Forum
Please come out this Sat. to the Mason Dixon Fairgrounds in Dela Pa. Located on rte 74 at the Md, Pa line.
This is our 2nd pull of the year.
Two sleds running, $15.00 per hook.
Antique 3mph classes 3K-12.5K Antique 6mph classes 3K-6.5K Cut tires allowed.
500 lb increments, 150lb over allowed.
Classic 5mph classes 7,9,11,13,14,15K
All proceeds go to the Delta Vol. Fire Co.
Thank yo
by
2255puller
-
Forum
What happened at Wright/Stemle? JD takeover?
by
2255puller
-
Forum
I may have an extra 8.3
443-617-1696
by
2255puller
-
Forum
What happpened to Carlton?
by
2255puller
-
Forum
Pm in your inbox
by
2255puller
-
Forum
How did you decube the cummins 8.3 to 466? Take out stroke or bore? What flywheel and clutch setup are you using?
Thanks
by
2255puller
-
Forum
Cancelled due to rain. Make up date will be the 28th at 7:00PM
by
2255puller
-
Forum
Let me know if you need some light rims.
by
2255puller
-
Forum
3150 in the early 2255s and the 3208 in the later ones. What is the cubic inch of the 1160?
If it is 540 or less, I may be interested.
by
2255puller
-
Forum
Thank you!
by
2255puller
-
Forum
Page 2 of 3
Pages: 123