Page 4 of 4
Pages: 1234
Results 91 - 110 of 110
Call Phil at riverside engine he has put steel noses on for years 419 927 6838
by
Bonestock
-
Forum
Columbus makes a good 1
by
Bonestock
-
Forum
Rpm dash is not waterproof but corsa is
by
Bonestock
-
Forum
I have contacted both rpm and corsa and both offer what sounds to be the same data functions and both Randy at rpm And Cody at corsa are very knowledgeable and great to talk to. But since Cody has been around tractor pulling his whole life I think he might have a better handle on what all goes into the whole big picture of tractor and truck pulling. However his system with the options I want i
by
Bonestock
-
Forum
Who has the most user friendly and quality in data acquisition
by
Bonestock
-
Forum
Yes you can just put the 2 center gears in it and flip the 3 sun gears you already have around the problem is finding just those 2 gears. Most of the straight cut gears have been picked through. The helical cut gears are easy to find.
by
Bonestock
-
Forum
Put a harts 3x3 on & it will run & you can find plenty of them for sale on here reasonable priced
by
Bonestock
-
Forum
If you need 1 to fit a 30 to 50 series head find a late serial # 4250 or 4450. If you need 1 for a 7.6l or 8.1l get 1 from a 4055 4255 4455 4555 they are as close to a center feed as you will get
by
Bonestock
-
Forum
5x20 or 5x22
by
Bonestock
-
Forum
Yes you can bore the block to put 4.875 sleeves & pistons in & it will be 531
by
Bonestock
-
Forum
700 to 750 would be safe
by
Bonestock
-
Forum
Heard this morning she will have a 100% recovery just sore for a little while. She is home.
by
Bonestock
-
Forum
John Hielman lost his battle with cancer yesterday. He pulled modifieds & 2wd trucks back from the 70s thru the 90s. Viewing is Friday June 1st from 2to8 pm & service is Saturday June 2nd in Rockford Ohio. RIP John
by
Bonestock
-
Forum
Red green & orange all very competitive
by
Bonestock
-
Forum
Yes there are 2 organizations in west central Ohio & east central Indiana 1st is the Dark County Tractor Pullers Association (DCTPA) we are 540 3.5x3 turbo ppump open rpm with maximum 24.5x32 tire & 2nd the michindoh pullers with same rules only 20.8x38 max cut tire both at 9500lbs all run very well together
by
Bonestock
-
Forum
If you want to try building 1 yourself look up Dakota toys they have a lot of toy tractor pulling parts just buy an older toy off eBay tear it apart add a roll cage whiney cut tires & a chrome stack & you have a pulling tractor. Did 1 for each of my boys they love it
by
Bonestock
-
Forum
Probably not the transmission its the dampner on the flywheel
by
Bonestock
-
Forum
You can't put a crank drive pump in a cam drive block but if you order a new crank from deere for your 404 you will get a crank that has the gear on it but you still use the cam drive oil pump. The cam drive oil pump flows plenty of oil
by
Bonestock
-
Forum
It will fit but no advantage they are the same stroke
by
Bonestock
-
Forum
Yes it will fit but is the same stroke as the 404 so no advantage
by
Bonestock
-
Forum
Page 4 of 4
Pages: 1234