John Deere 466 January 02, 2014 07:26AM
Looking at a John Deere 466 out of a 6620 combine. Would it be a good choice for a component tractor. Engine is open to offers what would it be worth?

Any help would be appreciated.

Re: John Deere 466 January 03, 2014 12:51AM
Anyone?

Re: John Deere 466 January 04, 2014 12:40PM
Any late model 466 is a good canidate. I found mine in a 4450 at a salvage yard and gave 1500 it was missing the exhaust manifold and turbo. Two stock components that im not going to use anyway, basically it was a 85% complete core. They range in price from 2500-4000. Most parts are interchangable from older units to newer. Not sure of any differences between a combine set up versus a tractor as far as which side of the block the injection pump and oil filter are located. I have found that "55" series heads flow the best and there are countless manifold/ turbo options. Hope this was helpful.

Re: John Deere 466 January 04, 2014 03:08PM
Try to find a 55 series engine so you will have the 55 series head.. Also try to find one that all ready has a P pump mount.. (Depending on you class)

Re: John Deere 466 January 05, 2014 01:03AM
Arent the 466's out of 4640's and bigger a little different block? I think the bolt holes are bigger in the block and front balancer is different (it may or may not be used anyway). Ive been told they will work but some frame modifications need done if going in 4010-4430 frame. Combine engine should work. They may have different manifolds, oil pan, and flywheel.

Author:

Your Email:


Subject:


Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message:
Website Statistics
Global: Topics: 38,625, Posts: 229,686, Members: 3,325.
This forum: Topics: 37,067, Posts: 225,898.

Our newest member JD_8520