Page 1 of 1 Pages: 1
Results 1 - 15 of 15
What color is this one??????? This happened at the 2004 National Farm Machiney Show...
by
andrew
-
Forum
If I remember correctly there is a code for the paint. My brother is a painter and he painted my tractor for me. I am not sure what the code is though, but I do belive there is one.
by
andrew
-
Forum
Did you try Mike Hillary out of Illinois, the Mean Green sled
Mean Green Sled Rental 815 486 7217 Michael W. Hillary 3045 E. 2700 N. Rd. Donovan IL 60931
by
andrew
-
Forum
Randy,
It is Andy, the guy that Jeff bought his tractor from. How are things going with it. Did you put different gears in it? Has he pulled it since the Keystone?
by
andrew
-
Forum
I took the tube out of the rockshaft, had a cover made that had roughly a two inch rise so it could be bolted down and I put the tube back in. Made a little "doghouse" in the front where the oil comes out of the housing and into the rockshaft. That way the tube could still be used.
by
andrew
-
Forum
I agree the old missouri profielders was fun. I wish it was back to that. I understand the safety equipment if you are going to run 3000 rpms, but do all that with the factory frame, factory appearing pump and stock engine displacement for the make and number tractor. The rules used to be stated stock engine, rearend and transmission for make and model but then an 856 decided they wanted a 414, a
by
andrew
-
Forum
I can't agree more. That profield class has gotten way out of hand.
by
andrew
-
Forum
I run a hot stock 3000 rpm tractor. I roughly go through 1 gallon of fuel in a pass and about 12 ounces of water for the water injection.
by
andrew
-
Forum
It is also the fact that the profield class used to be a starter class in ECMTPA. Back when it was Missouri Profielders Association guys that pulled in their had fun. Now it is just who can spend the most money, you have a select few that came in and spend more on their profield tractors than some people spend on their Limited pro tractors. It is rediculous. And every year they want to change som
by
andrew
-
Forum
They are in the links section. Their website is
by
andrew
-
Forum
The road you go south on off Highway 50 is called South Coutry Club Drive. About a mile south of Highway 50 on South Country Club Road you will hit a stop light if I remember right. Go straight through the stop light and it turns in Fairgrounds Road. The fairgrounds will be on the left a half mile to a mile down Fairgrounds Road.
by
andrew
-
Forum
I had a 414IH with an S300 and 13mm Ambac rotary on it. The pump was at full fuel and the govenor locked out. I had the timing set at around 44. Started with no either. Had a glow going down the track with little smoke. I ran it that way for a couple years before putting on a p-pump. I ran two teeth over 3rd to road gear and usually spun out at the end of the track.
So depending on your setup i
by
andrew
-
Forum
How was the 11,000 pound pro farm class? How did they all run? Any problems?
Thanks
by
andrew
-
Forum
Just wondering if anyone is going to post the results from last nights pull at the Keystone Nationals. Thank you!
by
andrew
-
Forum
Any new tractors, tractors not seen before, or just first time in the area. Pennsylvania, maryland area
by
andrew
-
Forum