Page 1 of 2
Pages: 12
Results 1 - 30 of 42
SealTec makes one like that.
by
Tim1573
-
Forum
When I was running a DT360 I had the stock rods hardened and used bolts and nuts from Extreme Studs.
by
Tim1573
-
Forum
I set Mine up that way. Use a sprayer regulator after the pump. I use 1" id supply hose from the tank to the pump and also from the regulator back to the tank. That little pump will flow a bunch and build some increadable pressure. It can be a bit of a bugger to prime. I start with a full tank, have everything plumbed and remove the pump from the front cover and spin it with a drill with a socket
by
Tim1573
-
Forum
Seal Tec 630-692-0633
by
Tim1573
-
Forum
I've used their rod bolts in the past and had good luck.
by
Tim1573
-
Forum
Josh from Missouri that called on the V8 Farmall 460. Tried calling Your number but it doesn't work. Please try agan or Message Me on here. Thanks!!!
by
Tim1573
-
Forum
Try Extremme Studs. I don't have there number handy but I think there in the Builders section. If they don't have them in stock they'll make them quickly. I've had good luck with mine.
by
Tim1573
-
Forum
Dalton Snyder You called on a Farmall V8 hotrod for sale. Please call back the answering machine cut off the last of Your phone number. 231-924-1271
Thanks
by
Tim1573
-
Forum
Thinking of making some steel quill housings (Diffrential carriers) for a Farmall 560 and was wondering what others opinions where on material to use. (ie 4140) Thoughts on heat treating. Appreciate the ideas!!!! Thanks Morgans!!!!!
by
Tim1573
-
Forum
Extreme studs!!! 317-696-7660
by
Tim1573
-
Forum
Check with Extreme studs. 317-696-7660 They can probebly help You out.
by
Tim1573
-
Forum
Diesel rules for Michigan are 315 and under twin 3x4 chargers allowed, Under 410 single 3x4 and an intercooler, Max of 470 and a single 3x4 charger.
by
Tim1573
-
Forum
Dave,
I did a little checking and the old Hudsonville Humiliator was sold to a Group and operated as the Fremont Humiliator until it was sold to Morley. Now it has been sold to a Group further North and used for pickups and farm stockers.
by
Tim1573
-
Forum
Yes, It does!!!! I appreciate the info!!!
by
Tim1573
-
Forum
Does anyone know off the top of their head what the final ratio of a Farmall 560 in 5th gear is and also what it changes to if the ring and pinion is switched to one from a 400? Thanks for the help!! I know this topic was covered in the past but I couldn't find it using the search method.
Thanks Morgan's for the site!!!
by
Tim1573
-
Forum
Anyone else have any in put? Anyone know off the top of there Head what the final ratio is of a Farmall 560 in 5th gear? Thanks!!
by
Tim1573
-
Forum
Building a Diesel LLSS and curious what's a good final gear ratio to shoot for. Looking to have 3 pulling gears to choose from and will be running at both 6000lb and 6500lbs. 466 with a 3 x 4 charger, head work, good cam, water, all the goodies. Thanks for the help!!!
by
Tim1573
-
Forum
I have mine on the ground side and have never had a problem. Have heard a couple Guy's with them on the positive side and burned them.
by
Tim1573
-
Forum
Bob King The Metal casting co. 417-766-8834 I have one and it's a nice piece!!
by
Tim1573
-
Forum
I know it was on here in the past but I can't find the thread. What are all the tractor chassis that a 5.9 Cummins can be used in? Looking at using in the LLSS class.
Thanks Everyone!!!!
by
Tim1573
-
Forum
Thanks Everyone for the input!!!! Not sure on the welding process I had dropped them off at the time for the Local welding shop to weld. They have done quite a few others and those haven't had problems. The hubs ran perfectly true when I got them back. These are the 2 3/4" axles.
Who makes the aftermarket axles? What kind of price tag on something like that?
by
Tim1573
-
Forum
We run at 6500 lbs up here.
by
Tim1573
-
Forum
OK Guy's, What can I do to keep this from happening again??? Break starts at the back side of the hub. It's on a 560 Farmall axle used on a Limited Light Superstock. The other side is starting to break also. My thinking is the hub was flexing from the force of the tire and wheel. Would 4 triangle gusset's off the back side eliminate this? Any other idea's or what have others d
by
Tim1573
-
Forum
Thanks for the info!!!!!
by
Tim1573
-
Forum
Anyone happen to know the torque spec for a International dt 360 truck engine rod bolts???
Thanks!!!!
by
Tim1573
-
Forum
Kenny's a great Guy to do Business with and makes nice parts!!!
by
Tim1573
-
Forum
Ryan,
My Thoughts and Prayers are with You and Your Family!!!
Tim Fortin
by
Tim1573
-
Forum
231-853-2626
by
Tim1573
-
Forum
Try 616-437-4581. Pretty sure that's it anyway!!!
by
Tim1573
-
Forum
Anyone?? Thanks!!
by
Tim1573
-
Forum
Page 1 of 2
Pages: 12