Page 1 of 2
Pages: 12
Results 1 - 30 of 42
The IPL will put on a good show.
by
Big Cube P Pump
-
Forum
So are you saying it takes 1400-1500 to be competitive ? In Hot Farm?
by
Big Cube P Pump
-
Forum
This has been talked about a few times so try to search this forum. I believe a gentleman that goes by KTA builds a quad range trans that will hold around a 1,000hp. Most would tell you to put in a 3 speed pulling trans and be done with it.
by
Big Cube P Pump
-
Forum
Come on out!
by
Big Cube P Pump
-
Forum
Bump
by
Big Cube P Pump
-
Forum
You need to do some searching on this site. This has been talked about several times and some even gave names and part numbers to build your own.
by
Big Cube P Pump
-
Forum
I have used the wrap from jegs and like it.
by
Big Cube P Pump
-
Forum
Well Richard that isn't what I meant. I meant just the front axle only. No frame rails and front weight rack, etc{complete tube front end}. If you know of another company that sells a front axle or front axle components why don't you help the man out and tell him?
by
Big Cube P Pump
-
Forum
You can buy a front axle assembly only from Haslag.
by
Big Cube P Pump
-
Forum
So is your manifold 7810 or 7920? I believe both are center feed? Will that fit under a 4010 hood?
by
Big Cube P Pump
-
Forum
No , would that help braking ?
by
Big Cube P Pump
-
Forum
Had considered 5/16 holes maybe 8 to 12. We won't do it.
Thanks king.
by
Big Cube P Pump
-
Forum
I am curious what size hole you drilled and how many ?
The brakes are bled well and the pads aren't new but in good condition.
by
Big Cube P Pump
-
Forum
Has anyone ever drilled holes in a stock JD 4020 brake disc ? If so , how many and what size hole. It seems like my brakes aren't as good as they should be. Thought maybe a few holes would remove some oil and help the brakes grab harder.
by
Big Cube P Pump
-
Forum
What is the maximum stroke that can be run on a 466 without a deck plate? With a deck plate?
by
Big Cube P Pump
-
Forum
Can a person just put in heavier gears in a stock trans or do I need an actual pulling tranny?
by
Big Cube P Pump
-
Forum
Someone stole it too.
by
Big Cube P Pump
-
Forum
What pressure does your summit run? Does anyone make an electric fuel pump that is capable of 200 psi?
by
Big Cube P Pump
-
Forum
I was curious how much water some of you run through a 466? I realize rpm's and turbo size can change what is needed but I just want a place to start. I have been told as much as 40 ounces in 15 seconds.
by
Big Cube P Pump
-
Forum
Cam driven factory pump.
by
Big Cube P Pump
-
Forum
I need to remove the oil cooler on a JD 466 to make some room. Can I just make two plates and block off the passages? Or does the oil need to circulate or anything special I need to do?
by
Big Cube P Pump
-
Forum
I was wondering what size cooler you have. I have been on the frozen boost site and am undecided what to order. I run a 466. Thanks
by
Big Cube P Pump
-
Forum
Thank you for the information , you know your intakes. Ok , is there much difference in a center load 55 series intake vs the front load intake that is run on a combine?? Thanks Again.
by
Big Cube P Pump
-
Forum
Arlyn is a 8.1 intercooler the same as a marine intercooler?? Chuck says the factory marine cooler would have too much restriction to use without gutting. Is that correct?? No offense Chuck , just want a second opinion.
by
Big Cube P Pump
-
Forum
Chuck is the marine intake gutted or are they using it as an icebox?? I have been told that they remove the internals and run them hollow. What is the advantage to this?? Is the marine intake normally front loading or was it machined for this??
by
Big Cube P Pump
-
Forum
Just exactly what is a heavy 4010 axle? Is it the same as a 4020? Never heard of such a thing.
by
Big Cube P Pump
-
Forum
Sacha I am amazed he can spin a HX 80 at 2700 rpm. It sounds as if he can lug decent at the end of the track. Maybe that turbo is not as big as I think.
by
Big Cube P Pump
-
Forum
Can you tell me how to put a 7 1/2 in a 4010??? What will (gear) I lose??? Thanks
by
Big Cube P Pump
-
Forum
I was considering buying a used fass fuel system. What kind of maximum pressure will they put out. Can't seem to get much info from the guy that will sell it to me. Thanks
by
Big Cube P Pump
-
Forum
Thanks for the info but don't the Indy cars run on ethanol??? Is there any difference in cooling properties of methanol vs ethanol???
by
Big Cube P Pump
-
Forum
Page 1 of 2
Pages: 12