Page 1 of 3
Pages: 123
Results 1 - 30 of 83
Running ported case heads on a 4.1 531 motor. Dry block. Will hardblocking heads help stop cracking??
Thanks
by
970 case lss
-
Forum
I can help you. 1-204-745-7591
by
970 case lss
-
Forum
I’d start by backing your fuel down a bit. You are too rich. Water is pretty close
by
970 case lss
-
Forum
More heat will definitely drive the turbo harder. How much water are you running??
I’d want to see 1400-1450 either with less fuel, water or both
by
970 case lss
-
Forum
I have got to stick up for Karl. Always gone above and beyond for me and very timely
by
970 case lss
-
Forum
Second that. Had lots of trouble until I switched away from copper
by
970 case lss
-
Forum
I last saw it around 5 years ago I bought Bill Lawrence pro stock Case tractor. It had been sitting for quite some time. From what I understand now it was sold to someone in the us a couple years ago
by
970 case lss
-
Forum
Unless you’ve pulled it apart and looked you won’t know, the pinion gears could be close to galled solid already. Buy the kit or complete carrier from rdl 1953. Great kit from experience. Needled rear corrects easier on wheel brakes and pulls strait.
by
970 case lss
-
Forum
Anyone know how much an 8 speed 930 rear/trans/axles and housings weigh with pto removed? Thanks
by
970 case lss
-
Forum
Anyone know the pushrod ball socket size in a .842 case roller lifter from lemkes?? Thanks
by
970 case lss
-
Forum
Where could I find a video of your tractor Farmers Fun??
by
970 case lss
-
Forum
Case 504 factory Pistons with witches hat removed and .200" valve reliefs. I think it puts me around 13.5:1 ?? Thx
by
970 case lss
-
Forum
Set the water pump right beside the oil pump centred under the crank in a triangle configuration is good?
by
970 case lss
-
Forum
Can I run my oil pump and water vane pump with a single 1.5" wide belt safely??
by
970 case lss
-
Forum
Looking to get in touch with a guy reg as sfd823 to ask him a few questions regarding an old post. He said he had reamed Waukesha blocks for roller lifters. Thanks
by
970 case lss
-
Forum
1-605-690-4950 Shaun Jensen
by
970 case lss
-
Forum
540 cubic inch vs 504 cubic inch on a case open rpm. Is the extra 36 cubic inch worth the 3000$ for new Pistons and the boring of the liners?? Thx in advance
by
970 case lss
-
Forum
I run a 25 with my hx 60. Would like to try the hx 80. Where's the best place to find one of the tighter housings for the hx 80?
by
970 case lss
-
Forum
Anyone know all the Exh housing options for a hx 80? Thanks
by
970 case lss
-
Forum
Where is everyone measuring? That's a factor as well
by
970 case lss
-
Forum
Thank you. Was just curious as to how it reacts. I have no intent of running it anywhere that it is illegal.
by
970 case lss
-
Forum
Anyone care to share their pros and cons? I run strait water currently but could run a water meth mix. On a hot farm with a cooler
by
970 case lss
-
Forum
Yes very true, I'm building a 540 open rpm p pump 4.1 turbo motor. Should have added more details. I know billet rods would be money well spent but if hardened hold up then I'll spend that money elsewhere
by
970 case lss
-
Forum
Anyone know the safe power level of a case 504 hardened rod with good quality bolts??
by
970 case lss
-
Forum
Starting a new build on a case motor. Anyone care to share benefits of staying with a flat tappet cam? If any. I lean towards roller as profiles are far better and more efficient. Thanks
by
970 case lss
-
Forum
I run a pobar setup on a 9500 lb super farm. Works great
by
970 case lss
-
Forum
Is extreme machine still building turbos??
by
970 case lss
-
Forum
Curious if anyone knows the weight diff between 10 ply ag casing cut and a half radials vs 10 ply old style double cut pullers. Both 24.5x32
by
970 case lss
-
Forum
Thanks for the info
by
970 case lss
-
Forum
Anyone used diesel werx in brookings sd?
by
970 case lss
-
Forum
Page 1 of 3
Pages: 123