absolutely one of the best to deal with, karl has went over and above to get parts to us in the past,, even sending parts air freight,try that with others, quality is top notch
by
m8888ja
-
Forum
do you have a phone number?
by
m8888ja
-
Forum
who builds a complete front end,frame ,,for I.H. tractors,,looking to buy
by
m8888ja
-
Forum
410-259-7505,,mild to wild,, up to 500 cc fuel del.
by
m8888ja
-
Forum
message me,i can tell you anything about the m100 pump,,been building them 30 plus yrs
by
m8888ja
-
Forum
anyone have any info on the steering system being used on some tractors,they have hydr. steering but no pump,,looks like an enclosed fluid system,any help?
by
m8888ja
-
Forum
got an hx 50 that will work well.nice tight turbo..400
by
m8888ja
-
Forum
keep your stock supply pump intact, just add an electric pump in the final; filter,, 5 gpm, 80 psi, works great..
by
m8888ja
-
Forum
throw it in the trash,call chuck vogel,huge difference,,i didnt think so till i tried one
by
m8888ja
-
Forum
wow,,are you lost max? wimers are good people,,they will help you in any way they can, i have had an a pumpof thiers for several yrs, not one problem,,i wouldnt buy anywhere else,
by
m8888ja
-
Forum
to redman,,,i have dealt with carl a long time, i have never had an issue,,great parts and really not bad in price, always answers any questions we have.if you call and let a message,,he has always called us back,,,sometimes within minutes,so keep u p the good work atlas
by
m8888ja
-
Forum
any other suggestions? i appreciate the answers
by
m8888ja
-
Forum
its actually a pretty nice head,, precision charger,,,i am thinking 600 cc fuel,,and 32 oz, water
by
m8888ja
-
Forum
525 cu, in, i.h. engine a pump, 2.8 charger.open rpm .starting point for water inj. and fuel cc's..?? 9500 lb. class
by
m8888ja
-
Forum
any reccommedations on who has good rods for the ih 400 series,,appr, 800 to 900 hp..other than hyper?? anyone use colbergs?
by
m8888ja
-
Forum
as one post above says,,as rpm increases,fuel delivery will decrease on the model 100. you just dont have enough timefor the charge ports to refill the plunger bore fast enough..remember,,,,1 plunger,,,,6 cylinders,most shops draw the cc of fuel at 750 to 1000 rpms on the test bench because of fear for plunger seizure . i have ran them up to 2000 rpm and delivery will derease.even with 100 psi ch
by
m8888ja
-
Forum
i can build you a 13 mm model 100 that will flow 470 and stay alive. have 3 on tractors now.
by
m8888ja
-
Forum
couldnt agree more,karl is great to deal with,he knew where a great deal was on a clutch i wanted,so instead of buying it and reselling,he told me about it,i thought that was very nice
by
m8888ja
-
Forum
any pics. price?
by
m8888ja
-
Forum
atlas - 12 years ago
does atlas make hitches?? cant seem to get thru with the number i have
by
m8888ja
-
Forum
rpm's = ground speed,, name of the game,thats simple
by
m8888ja
-
Forum
rod length has nothing to do with how long the piston stays at the top or bottom,its in the stroke of the crank, simple physics tell u that, only gain is small durability at best
by
m8888ja
-
Forum
hubs - 12 years ago
best place to buy weld on axle hubs for an i.h. 1466 , 3.5 axle, ???
by
m8888ja
-
Forum
call vogle manf. best cam going for the ih, we had a few hyper 00 cams,vogels are superior to those
by
m8888ja
-
Forum
harts is not 14 mm. it is appr, 13.5 mm. and they will not put out 450 cc. aint gonna happen.very expensive and most of those have a runaway problem
by
m8888ja
-
Forum
your asking for a lot out of that 4 cyl.
by
m8888ja
-
Forum
gonna be hard pressed to keep that size turbo spinning with the best built m100 pump. you will need to be a lower gear than most ,and that will hurt you, just dont think you will be happy with that setup.high output m100 pump will set you back 1800 and up.better use an a inline or p . or go to a smaller turbo and a good m100.
by
m8888ja
-
Forum
how much more power??
by
m8888ja
-
Forum
Re: 456 - 12 years ago
now your talking, thats a very realistic number,, i really need to see that 1490, it aint gonna happen,,, forrestor or not, that was prolly ft.lbs.
by
m8888ja
-
Forum
better save urself a whole lot of time and money,forget the mw pump, a well built model 100 ambach pump will give u better return, 450 plus cc's. unless you run a p pump or a pump,,that mw pump wont cut it, these guys know,been there done that
by
m8888ja
-
Forum