Page 1 of 4
Pages: 1234
Results 1 - 30 of 95
Actually there were 9 tractors that committed for that week end. The heavy rains has a negative effect on crop production and if your conditions were right you might want to stay home and plant. Two of the tractors are still waiting for parts and the parts were promised way before the pull, (you know how that goes}. Shedden had the same 4 tractors and the results are: 1st at 333.57' L
by
ed shoobridge
-
Forum
There's always next year for Canada. Maybe you will consider Armada in August?
by
ed shoobridge
-
Forum
Due to the weather some had to support their lively hood and stay home to plant, some are still waiting for parts. Me, sold my tractor due to physical limitations over the last three years.
by
ed shoobridge
-
Forum
Any LLSS pullers who want to experience a great week end and see some of the country side of Ontario, Canada. The weekend starts on Friday night, June 14th at Shedden, Ontario. The LLSS class will be first on schedule. Pullers and crew will be treated to a free meal and drink. June 15th, Sat. afternoon the class moves to Dungannon, Ontario. Both pulls are well organized and welcome our class
by
ed shoobridge
-
Forum
I could of responded to all you mentioned above, however the question 1466HF I tried to answer. Also, test the oils and make a decision based on data not emotion. Bubbastubs refers to higher oil pressures when engine is hot that's because Schaeffer oil is a partial parifin oil. Schaeffer and CenPeCo are the only oils I know of that use Parifin base.
by
ed shoobridge
-
Forum
Answer to Used IT. CenPeCo Racing oils that are straight wt. (SAE40, 50, 60, 70, and 70plus. have a High Pressure Additive that eliminates air bubbles. As I understand it at some point with thicker oils air bubbles are a problem causing not 100% lubrication. CenPeCo's HPA oils eliminates that problem.
by
ed shoobridge
-
Forum
Before you go to the new penn grade (replaced brad penn) or even the old brad penn, test it. I have and found out their brake in oil has less zinc than cam manufactures recommend. I been told ground 0 is 900 ppm anything less than that premature ware on cams on flat lifter engines. There brake in oil is less than that based on my test results. There 20w50 racing oil is also low in zinc and ph
by
ed shoobridge
-
Forum
Cen Pe Co Racing oil is 2400 ppm on zinc and phosphorus based on independent laboratories testing I had done. Interesting take on peoples opinions.
by
ed shoobridge
-
Forum
After much thought about this, I have decided to not do a 2019 schedule. My reasons are basically politics that I have run into over time and this year. This has nothing to do with the thead listed recently about grand national. I have a hard time encouraging pullers to support my schedule when I witness two different times unfairness on the track by track manager and flag man from other pull
by
ed shoobridge
-
Forum
The schedule I put out is a collection of pulls that pullers who are interested in and are made aware of. It all began 4 years ago when 2 pullers from the south came north to a pull that had alot to be desired. They told me they wanted to see country and compete with different pullers. That's when I began to put pulls on a schedule that were grouped together and paid was listed with con
by
ed shoobridge
-
Forum
For more information about wt. or Langford call the contact person listed.
by
ed shoobridge
-
Forum
Thats what I was told by the promoter. I believe W NY has changed to 6400#'s.
by
ed shoobridge
-
Forum
Sorry didn't see your first posting. Here it is with one exception. At Armada I will be paying additional money for the top three places total points from Sat, and Sunday. plus the normal pay out.
by
ed shoobridge
-
Forum
Anyone know where to get freeze plugs for 656 r axle when removing plow arms. The IH part number used on three point delete is 388134R1 CASE/IH doesn't carry this part any more and freeze plug manufactures don't carry anything that big. My measurement is approx 3.41 Dia. Any help on this would be appreciated. Thanks in advance. PS Bates also doesn't have any new old sto
by
ed shoobridge
-
Forum
Thank you. Looking forward to see Langford 2018.
by
ed shoobridge
-
Forum
Wayne Stein and the War Horse Pulling Team has won the points for 2017. They have been awarded a cash award and I would like to thank Wayne and the team for their support. I would like to take this time to thank All who pulled or supported the series, the Pullers, Sponsors, Promoters and all who paid for a seat to see this class. Thank You. I wish everybody a joyous and safe Holiday.
by
ed shoobridge
-
Forum
Does anyone know of a source who currently makes a riser or spacer for a DT360 aluminum valve cover or a billet 360 valve cover? My sources have them for the 400 series but I can not find one for a 300 series. ??? respond here or edshoobridge2007@gmail.com Thanks.
by
ed shoobridge
-
Forum
Yes, there was a paid photographer at Armada. Tom will make a anouncement next week based on a phone call I got last night.
by
ed shoobridge
-
Forum
Send a unused sample to a lab to establish a base line. You will be shocked what some of the results are. Base your decision on data not a emotional decision based on a name.
by
ed shoobridge
-
Forum
If your talking about a IH d282 that came in a 560 or 706, Yes we did, the tractor lives in Richmond In. Owner today is Bob Rhodes. When we owned the tractor it was the Haul'n Harvester. I believe you can still see it on U tube. Exception we ran it on alcohol and head was filled solid.
by
ed shoobridge
-
Forum
I was just informed that the Ashatabula Fair or Jefferson, Ohio pull has changed their weight to 6400#'s Questions regarding this matter contact Ron Bailey at 440-821-0557. Thanks.
by
ed shoobridge
-
Forum
Tonight and Sat. Night is Tipton, In. fair pull. This is the second week end for the Northern Light Limited Super Stock Series. Hope to see Many entries there. Hope the weather is favorable. Any questions call Todd at 765 860 4430. National rules @6250#'s.
by
ed shoobridge
-
Forum
This weekend starts the series with a $8000 US total purse dedicated to the LLSS class in Shedden, Ontario and Dungannon, Ontario Canada. This year schedule in total amounts to $51,250 for 14 pulls. See pdf file above for a pull that you can support. If anyone plans on supporting the Canadian Pulls this weekend and wants a copy of a letter from Canadian Customs acknowledging that equipment
by
ed shoobridge
-
Forum
Hope this worked.
by
ed shoobridge
-
Forum
Jake, this might not be the best way to contact you, but I'm not sure the e mail I sent you went thru. Please update the 2016 to the 2017 schedule on the revolving header. Brain sent you a file representing the update. If you don't have it please contact me or Bryan. Thank you.
by
ed shoobridge
-
Forum
The total committed money is $51,250 for the series, 13 locations in 5 States and Canada.
by
ed shoobridge
-
Forum
This is information I was told by representatives of their clubs: Western NY, Ohio, East side Mich(TTPA), West side of Mich(exception of weight till end of 2017 season) There may be others I am not keeping track. The 2017 N. llss Series will follow the rules for the listed pulls in Canada, IN. NY, Mich, Ohio and Wisc, (exception Monroe Wisc. turbo rule, call John Anderson for details.
by
ed shoobridge
-
Forum
Need to bring this back to top.
by
ed shoobridge
-
Forum
US Dollars. They pay in Cash.
by
ed shoobridge
-
Forum
Attached is the PDF File for the 2017 Series.
by
ed shoobridge
-
Forum
Page 1 of 4
Pages: 1234