Page 1 of 6
Pages: 12345
Results 1 - 30 of 164
SBJD factory 5 gallon oil pan $475.
Shot blasted and painted additional $100.
Internally painted with Glyptal to improve drain back additional $50.
Contact. 7 one 2 210 0106
by
3010JD
-
For Sale
Used hand bent lines. 5 stainless. One isn’t.
Include some home made clamps. Can send picture.
$400 Buyer pays shipping.
Contact 7 one 2 210 0106
by
3010JD
-
For Sale
Selling a set of used SBJD head studs from Extreme Studs. It’s the 3 different length style set.
11 each 6” long
8 each 7” long
7 each 8” long
$350. Buyer pays shipping.
Contact 7 one 2 210 0106
by
3010JD
-
For Sale
In need of a valve spring compressor that is capable of working with the double spring plus damper or triple spring setups. What do you recommend?
Thanks
by
3010JD
-
Forum
Looking for one of those real tall rocker covers.
Contact 7 one 2 210 0106
by
3010JD
-
Wanted
Looking for the outer diameters of the different style camshaft gears. Bigger one that engages the crank gear.
Thanks
by
3010JD
-
Forum
I want to be able to adjust fuel setting without removing the filter from the manifold. And want to eliminate the 2 steel tubes on the inside of the oil pan that mount into the oil pump/block. Not just cap it off on the left outside.
Thanks
by
3010JD
-
Forum
Looking for ideas or better yet already available items for two modifications.
First: Does anyone sell an adapter to move the stock filter manifold (30/40) back to make access to the fuel adjustment?
Second: Am using the stock crank driven oil pump. Not investing in external pump. But would like to eliminate the internal oil cooler steel lines. Remove cooler bypass and some way to permanen
by
3010JD
-
Forum
Have two new stainless exhaust v band clamps. 3” both.
$22 shipped in continental 48. Will take Paypal.
Contact 7 one 2 2 one 0 0106
by
3010JD
-
For Sale
In need of the manual and wiring diagram for a Sun Electric VAT 28 test stand. Have the few page quick thing. Want the complete manual.
Contact 7 one 2 2 one 0 0106
Thanks
by
3010JD
-
Wanted
Looking for a nice set of 22 x 38 9 bolt aluminum rims. About 12” back space. Have some steel rims to trade if interested. Please send pictures.
Contact 7 one 2 2 one 0 0106
by
3010JD
-
Wanted
Schell Welding
515 383-4830
Cambridge, Iowa
They repair cast. Not aluminum.
by
3010JD
-
Forum
Can a rear axle of a JD that’s wore beyond the undersize bearing dimension be welded up and ground down at the outer bearing and seal retainer without weakening it? Of course people weld on hubs all the time. But not directly at the point of support.
Thanks for any information.
by
3010JD
-
Forum
Joe Dirksen was a pioneer in pulling trying different things in the 60’s and 70’s. He pulled an IH 460 or 560. Think it was a 460. Anybody have any information or better yet pictures? He ran out of western Iowa.
Thanks
by
3010JD
-
Forum
Anything new to report on the situation of the 3200 rpm class?
Thanks
by
3010JD
-
Forum
Anybody have pictures of this setup fitting on a 4010 and under a normal hood? Gonna be using a S300 size turbo.
by
3010JD
-
Forum
Maybe interested in your Atlas clutch.
by
3010JD
-
Forum
Any experience using the 2 psi residual valves so a person doesn’t have to rely on pumping the brakes? I’m referring to the stock internal JD disk brakes. Also what’s inside the valves? Any parts that would not be hydraulic oil friendly?
by
3010JD
-
Forum
Outlaws doesn’t have a Pro Farm class far as I know. . Superfield is the closest thing. And they are not the same as any other Pro Farm class that I have seen. Check the Nebraska Bush Superfield rules. That’s what it is.
by
3010JD
-
Forum
From what is your left, nonstructural, block from? The right picture looks like a typical tractor block.
by
3010JD
-
Forum
What’s the difference between a structural block and non structural block? How do you tell the difference? I have heard of this before but so far nobody can tell me.
Thanks
by
3010JD
-
Forum
Just looking for replacement suppliers. Used, especially good condition units, is getting harder to find and expensive.
by
3010JD
-
Forum
Abilene Machine is the only place I find for replacement hoods. How is the quality? Any other suppliers around?
Thanks
by
3010JD
-
Forum
Working on a install on a later 404 NA engine. Have a very late M&W 4010/4020 setup. But I need the dimension for the spacers from the exhaust manifold to the heat shield.
Thanks in advance.
by
3010JD
-
Forum
Why the major difference in design of a dampener between a 4440 and the 4640/4840?
by
3010JD
-
Forum
Recently got a call about my SS # is in danger thing. Only reason I answered was it came in on a legitimate phone number from someone I know in my contacts with his name showing. I’m sure he didn’t do it. So now they can cover it up using someone else’s phone number?
by
3010JD
-
Forum
Lately every response to my for sale adds has been a scam. Don’t have this problem on Craig’s List. Am I doing something wrong? Any suggestions to help prevent this?
Thanks in advance.
by
3010JD
-
Forum
In need of complete aluminum radiator with fan and shroud built to it OEM style. Not something that’s been added. Approximately 16” square, 2 or 3 row or equivalent. Any suggestions appreciated.
Thanks
by
3010JD
-
Forum
Anybody know which spacers to use on the JD clutch adjustment tool for a 8430 or 8440?
Thanks
by
3010JD
-
Forum
If you rely on FB and word of mouth there’s a good chance that you’re gonna be very disappointed in the turnout. Seen it happen many times. More pullers than fans. Want pullers and fans to show up? You have to advertise everywhere you want to draw people from. I drive as far as 150 miles to pull. But missed pulls as close as 30 miles from home because I never heard about them.
by
3010JD
-
Forum
Page 1 of 6
Pages: 12345